Presentation on TRL research undertaken on behalf of the European Commission to improve the capacity of UN Regulation 129 to differentiate between non-integral child restraint systems, especially via parameters for chest and abdomen loading.

Presentation of TRL research into optimal belt routing for non-integral enhanced child restraint systems, applicable to Q3, Q6, and Q10 dummies, for use in UN R129.

Proposal for labeling requirement to avoid misuse.

Revision 1 by the CRS informal group to the proposal presented in document GRSP-58-08. This is an updated version for eventual submission to the 59th GRSP session as a formal document per the discussion within GRSP of the informal proposal GRSP-58-08.

Updated report (based on the previous report GRSP-58-22) for presentation to the 59th GRSP session.

Presentation on child restraint systems that can be integral or non-integral and related labeling/installation issues.

Proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129.

Discussion proposals regarding the type approval of child restraint integral shield systems under UN R129.

Presentation on Japanese proposals concerning flammability test procedures, installation of i-size CRS in ISOFIX seating positions, and to amend the footnote regarding the use of the Q10 dummy in the lateral impact test.

Presentation concerning the interpretation of UN R129 with regard to approval markings and i-Size logo marking on CRS seat combinations.

CRS informal group draft revision of the formal proposal submitted to GRSP (GRSP/2016/4).

Proposal for Phase 3 development aimed at preventing the approval of CRS systems with unduly complex fixation designs.

Revision 2 of the proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129.

Revision 1 of the proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129.

Revised version of the proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129, incorporating the input of the Technical Service Groups.

iSize CRS vehicle compatibility analysis

Technical services question on application of testing under UN R44. The problem is how to test ECRS that do not fit into the required VSF, they are “vehicle specific”, but do we have to test them on body shell?

Revised version of the proposal from the CRS informal group to introduce phase 2 amendments regarding the approval of booster-seat CRS category (booster seat with backrest) into UN R129. This version supersedes document GRSP/2016/4 and will be introduced at the next GRSP session in May. Pursuant to the GRSP discussions, the draft may be subject to further changes during the June CRS-59 session.

Working draft of UN R129 including the Phase 2 amendments of the CRS informal working group concerning non-integral Universal Enhanced Child Restraint Systems (i-Size booster seat) and vehicle-specific booster seats.

Working draft of the current text with recent changes highlighted in yellow.

Presentation of outcomes of the 59th GRSP session of relevance to child restraints and the CRS informal group.

Presentation on scope and content for the third-phase development of UN R129.

Proposal to revise paragraph 6.6.4.1.6.2. as “Without the anti-rotation device and without the shoulder strap positioner in use, unless a visual [or/and] an audible warning signal mechanism is provided to prevent incorrect use of the anti-rotation device and/or the shoulder strap positioner.”

Proposal to extend requirements for the maximum dimensions of shoulder height to non-integral enhanced CRS.

Review of the UMTRI seating procedure performance towards informing the development of phase 2 of UN R129.

Working draft proposal to update UN R16 in accordance with the Phase 2 development of UN Regulation Nos. 44 and 129 on child restraint systems, especially with regard to the ISO booster-seat fixtures (B2 and B3).

Proposal to align provision of the UN R14 with the phase 2 (02 series of amendments) development of UN R129 on child restraint systems.

Proposal to revise paragraph 6.6.4.1.6.2. to prevent incorrect use as “Without the anti-rotation device and/or without the shoulder strap positioner in use, unless:

• a mechanism or
• a visual and an audible warning signal

Proposal for Appendix 5: Installation of booster seat fixtures. Addition of ISO/B2 and ISO/B3 booster seat fixtures.

Working draft text to update UN R14 with regard to ISOFIX restraint fixtures.

Presentation concerning a new design child restraint system based on belt guides that presents concerns with regard to its objective assessment under UN R129.

Update on testing of Q10 child ATD with new hip liner design.

Working draft text to update UN R14 with regard to ISOFIX restraint fixtures.

Working draft proposal to update UN R16 in accordance with the Phase 2 development of UN Regulation Nos. 44 and 129 on child restraint systems, especially with regard to the ISO booster-seat fixtures (B2 and B3).

CRS informal group draft text proposing clarifications and editorial corrections to the text of the 02 series of amendments to the UN Regulation No. 129.

CRS informal group draft text proposing clarifications and editorial corrections to the text of the 01 series of amendments to the UN Regulation No. 129.

Input concerning use and misuse of traditional CRS, including manufacturer and consumer adaptations and responses that should be avoided through the development of UN R129.

Commented working draft of document GRSP/2016/22 pursuant to the 61st CRS informal group session

Working draft of document GRSP/2016/24 pursuant to the 61st CRS informal group session

Technical Services Group discussion concerning the definition of the term “mechanism” in paragraphs 6.6.4.1.6.1.1. and 6.6.4.1.6.1.2. designed to prevent incorrect use of the anti-rotation device and/or shoulder strap positioner.

Technical Services Group proposal for CRS fixture specifications and discussion of open issues regarding UN R129 test procedure interpretation.

Proposal for amendments relating to the approval of Enhanced Child Restraint Systems that feature an impact shield.

Proposal from OICA to harmonize the mass tolerances of the ISO CRS fixtures and provide for transitional provisions.