Non-Governmental Organization
Listing documents from 2016
Documents also available for 2020 2019 2018 2017 More than 4 years ago
Show all 251 documents (This may take some time)
Date Reference Description Status
27 Jan 2016 GRRF-81-11
Proposal for amendments to Regulation No. 54
Working Party Informal Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to clarify the provisions for the minimum heights of markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. In addition, the proposal aligns the table on minimum marking heights to correspond with the related figure by using lowercase letters to denote dimensions in both (currently, the figure uses lowercase, but the table uses uppercase).
27 Jan 2016 GRRF-81-12
Proposal for amendments to Regulation No. 109
Working Party Informal Retreaded Tires for Commercial Vehicles CV Retreaded Tires Uniform Provisions Concerning the Approval for the Production of Retreaded Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to<ol><li>change measurement units for drum speed in Annex 7 from min<sup>-1</sup> to km.h<sup>-1</sup> to align the requirements with other tyre regulations;</li><li>correct wording from "speed category symbol" to "speed symbol" (as defined in para. 2.33);</li><li>correct wording from "load capacity index" to "load index" (as defined in para. 2.32);</li><li>correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;</li><li>correct a boundary value of load index in Annex 7, Appendix 1;</li><li> delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test; and</li><li>align the text of Annex 10 with Annex 7 of UN R117 pursuant to the adoption of Supplement 5 to the 02 series of amendments to that regulation.
05 Jul 2016 GRRF/2016/33
Proposal for amendments to the 02 series of amendments to Regulation No. 30
Working Party Working Pneumatic Tires Pneumatic Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Motor Vehicles and their Trailers Proposal to correct paragraph number references due to the recent renumbering of definitions.
07 Jul 2016 GRRF/2016/35
Proposal for Supplement 22 to the 00 series of amendments to Regulation No. 54
Working Party Working Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Correction of the paragraph numbering pursuant to the adoption of Supplement 21 and deletion of a redundant note at the end of paragraph 6.1.5.3.3.
05 Jul 2016 GRRF/2016/36
Proposal for amendments to Regulation No. 54
Working Party Working Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to clarify the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. In addition, the proposal corrects the use of uppercase letters to denote dimensions where lowercase letters had been inserted.
07 Jul 2016 GRRF/2016/38
Proposal for amendments to Regulation No. 106
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Proposal to: a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.); b) Include a definition of "Manufacturer" extracted from the resolution "R.E.3"; c) Adopt a common definition and use of the terms "Manufacturer’s name"," Brand name", "Trademark", "Trade description" and "Commercial name" and their links; d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only; e) Add information in the certificate to clarify the relationship with the certified products; f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as "interchangeable towed equipment" and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats; g) Eliminate redundant marking requirements; h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings; i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.
05 Jul 2016 GRRF/2016/39
Proposal for amendments to Regulation No. 106
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Proposal to amend Annex 5 with regard to Improved Flexion (IF) tyres and Very high Flexion (VF) tyres.
05 Jul 2016 GRRF/2016/40
Proposal for amendment to Regulation No. 109
Working Party Working Retreaded Tires for Commercial Vehicles CV Retreaded Tires Uniform Provisions Concerning the Approval for the Production of Retreaded Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to amend Annex 7 (based on the documents ECE/TRANS/WP.29/GRRF/2015/39 and GRRF-80-16 from Slovakia) and Annex 10. This proposal would:<ol><li>change measurement units for drum speed in Annex 7 from min-1 to km.h-1 to align the requirements with other tyre regulations;</li><li>correct the wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);</li><li>correct the wording from “load capacity index” to “load index” (as defined in para. 2.32);</li><li>correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;</li><li>correct a boundary value of load index in Annex 7, Appendix 1;</li><li>delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test.</li></ol> In Annex 10, the proposal aligns the text with Annex 7 of UN R117, 02 series of amendments, Supplement 5.
05 Jul 2016 GRRF/2016/41
Proposal for amendments to Regulation No. 109
Working Party Working Retreaded Tires for Commercial Vehicles CV Retreaded Tires Uniform Provisions Concerning the Approval for the Production of Retreaded Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to clarify provisions for the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. The proposal also corrects tables and figures for the use of lowercase letter to denote tyre dimension specifications.
05 Jul 2016 GRRF/2016/42
Proposal for Supplement 10 to the 02 series of amendments to Regulation No. 117
Working Party Working Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance Tire Noise, Wet Adhesion, and Rolling Resistance Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance Proposal to correct the text where the word "tyres" was inadvertently omitted from Paragraph 2.1.
07 Jul 2016 GRRF/2016/43
Proposal for amendments to the draft Regulation on Tyre Installation
Working Party Working Tyre Installation Tyre Installation Regulation on uniform provisions concerning the approval of motor vehicles with regard to the installation of their tyres (tentative title pending regulation development) Proposal for minor editorial corrections to the text.
07 Jul 2016 GRRF/2016/44
Proposal for amendments to the draft Regulation on Tyre Pressure Monitoring System
Working Party Working Tire Pressure Monitoring Systems Tire Pressure Monitoring Systems Uniform provisions concerning the approval of vehicles with regard to their tyre pressure monitoring systems Proposal for a minor editorial correction to the text. Paragraph 4.8. should read "Annex 2 to this Regulation gives an example of approval marks." The current text refers to "examples" where there is only one provided.
08 Jul 2016 GRRF/2016/46
Proposal for a new Resolution on Tyre Sizes
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to establish a new Resolution on standardized sizes and to refer to this Resolution in Annex 5.
08 Jul 2016 GRRF/2016/47
Proposal for amendments to Regulation No. 106
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Proposal to remove the technical content in Annex 5. This content would be incorporated into a new Resolution on Tyre Sizes as proposed in document GRRF/2016/46.
20 Sep 2016 GRRF-82-21
Definitions in regulations dealing with tyres
Working Party Informal Pneumatic Tires Pneumatic Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Motor Vehicles and their Trailers Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Motorcycle and Moped Tires Motorcycle Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Motor Cycles and Mopeds Retro-reflective Tires for Two-wheeled Vehicles Moped Retro-reflective Tires Uniform Provisions Concerning the Approval of Retro-reflective Tyres for Two-wheeled Vehicles Retreaded Tires for Motor Vehicles Retreaded Tires Uniform Provisions Concerning the Approval for the Production of Retreaded Pneumatic Tyres for Motor Vehicles and their Trailers Retreaded Tires for Commercial Vehicles CV Retreaded Tires Uniform Provisions Concerning the Approval for the Production of Retreaded Pneumatic Tyres for Commercial Vehicles and their Trailers
20 Sep 2016 GRRF-82-22
Revised proposal for amendments to the 02 series of amendments to Regulation No. 30
Working Party Informal Pneumatic Tires Pneumatic Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Motor Vehicles and their Trailers Updated proposal to correct paragraph number references due to the recent renumbering of definitions based on document GRRF/2016/33.
20 Sep 2016 GRRF-82-23
Revised proposal for Supplement 22 to the 00 series of amendments to Regulation No. 54
Working Party Informal Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Revised proposal to correct the paragraph numbering pursuant to the adoption of Supplement 21 and delete a redundant note at the end of paragraph 6.1.5.3.3, based on document GRRF/2016/35.
20 Sep 2016 GRRF-82-24
Revised proposal for amendments to Regulation No. 106
Working Party Informal Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Revised proposal, based on document GRRF/2016/38, to: a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.); b) Include a definition of "Manufacturer" extracted from the resolution "R.E.3"; c) Adopt a common definition and use of the terms "Manufacturer’s name"," Brand name", "Trademark", "Trade description" and "Commercial name" and their links; d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only; e) Add information in the certificate to clarify the relationship with the certified products; f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as "interchangeable towed equipment" and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats; g) Eliminate redundant marking requirements; h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings; i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.
21 Sep 2016 GRRF-82-25
GTR No. 16 on Tyres: Status report and further steps
Working Party Informal Tires Tires This project would establish a "global technical regulation concerning uniform provisions for pneumatic radial tyres for passenger and light truck (commercial) vehicles".
23 Sep 2016 GRRF-82-24/Rev.1
Proposal for amendments to ECE/TRANS/WP.29/GRRF/2016/38
Working Party Informal Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Revised proposal, based on document GRRF/2016/38 and revising GRRF-82-24, to: a) Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.); b) Include a definition of "Manufacturer" extracted from the resolution "R.E.3"; c) Adopt a common definition and use of the terms "Manufacturer’s name"," Brand name", "Trademark", "Trade description" and "Commercial name" and their links; d) Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only; e) Add information in the certificate to clarify the relationship with the certified products; f) Align definitions with Regulation EU 167/2013 which defines vehicles in category S as "interchangeable towed equipment" and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats; g) Eliminate redundant marking requirements; h) Clarify the inflation pressure to be used for measurements and tests and related tyre markings; i) Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75.
11 Nov 2016 GRRF/2017/4
Proposal for amendments to Regulation No. 54
Working Party Working Commercial Vehicle Tyres CV Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Commercial Vehicles and their Trailers Proposal to add specifications for tyre sizes 33x11.50R20LT, 35x11.50R17LT, 37x13.50R26LT, 36x15.50R20LT and 40x15.50R26LT.
10 Nov 2016 GRRF/2017/6
Proposal for a new Resolution on Tyre Sizes
Working Party Working 1958 Agreement 1958 Agreement Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Regulation No. 106 contains standardized tyre sizes which often need to be updated in line with technological progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the newly standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.
10 Nov 2016 GRRF/2017/7
Proposal for Corrigendum to Regulation No. 117
Working Party Working Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance Tire Noise, Wet Adhesion, and Rolling Resistance Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read "1.00", not "100" as appeared erroneously in the adopted text.
10 Nov 2016 GRRF/2017/9
Proposal for amendments to Regulation No. 106
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Proposal to:<ol class="alpha"><li>Align definitions and contents of paragraphs with the other tyre regulations (UN R30, R54, R117, etc.);</li><li>Include a definition of "Manufacturer" extracted from the resolution "R.E.3";</li><li>Adopt a common definition and use of the terms "Manufacturer’s name"," Brand name", "Trademark", "Trade description" and "Commercial name" and their links;<li>Clarify which markings shall be moulded on both sidewalls of the tyre; and those which shall be moulded on one sidewall only;</li><li>Add information in the certificate to clarify the relationship with the certified products;</li><li>Align definitions with Regulation EU 167/2013 which defines vehicles in category S as "interchangeable towed equipment" and includes tread patterns for ‘implement traction tyres’ that consist of blocks rather than lugs or cleats;</li><li>Eliminate redundant marking requirements with the requirement for "@kPa" markings effective from 1 September 2017;</li><li>Clarify the inflation pressure to be used for measurements and tests and related tyre markings;</li><li>Align the current rules for calculating the dimensional limits in accordance with ISO, all major tyre standards, and as proposed for UN R30, R54, and R75;</li></ol>
14 Nov 2016 GRRF/2017/5
Proposal for amendments to Regulation No. 106
Working Party Working Tires for Agricultural Vehicles Agricultural Tires Uniform Provisions Concerning the Approval of Pneumatic Tyres for Agricultural Vehicles and their Trailers Regulation No. 106 contains standardized tyre sizes, which often need to be updated, following the technical progress. In order to accelerate the update process of the Regulation and limit the number of amendments, it is proposed to insert in a new Resolution the standardized sizes and to refer to this Resolution in Annex 5. As a temporary solution to assess the effectiveness of such proposal, the Annex 5 of Regulation No. 106 will be kept as it is with no further updates. After a trial period of approximately two years and upon confirmation of effectiveness, the complete Annex 5 of Regulation No. 106 would be transferred to this Resolution on Tyre Sizes.