GRSP-56-38
Proposal to amend the draft amendment to GTR No. 9 on the bumper test area
Downloads
UNECE server
Related documents
Proposal from the Bumper Test Area Task Force to revise the procedure for determining the bumper test area under the pedestrian safety regulation. This proposal corrects shortcomings in the current definitions which could lead to a narrower test area than intended (leading to less effective pedestrian protection). This proposal does not take into account potentially harmful hard structures such as bumper beams that may lie behind the outer contour or front fascia extending beyond the defined bumper corners as consensus within the task force could not be reached.
8. The expert from EC introduced ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30, submitted by the Task Force on Bumper Test Area (TF-BTA), a subgroup of the Informal Working Group on global technical regulation No. 9 – Phase 2, and proposing an amendment to the provisions of the bumper test. He explained that the current provisions allow the area to be narrower than intended in the provisions of the UN GTR. He added that ECE/TRANS/WP.29/GRSP/2014/17 was proposing a new method by introducing a practical determination of angle surfaces, to be tested with the FlexPLI, by using a corner gauge. Moreover, he explained that ECE/TRANS/WP.29/GRSP/2014/30 was proposing the introduction of the definition of rigid bumper beam in the test area in addition to the above-mentioned new test method. He finally informed GRSP that a test report on research conducted by EC on this issue was available. The expert from Japan gave a presentation (GRSP-56-03) to support ECE/TRANS/WP.29/GRSP/2014/17. The expert from Korea presented GRSP-56-20 supporting ECE/TRANS/WP.29/GRSP/2014/30. The expert from OICA introduced GRSP-56-30, supporting the new method as proposed by ECE/TRANS/WP.29/GRSP/2014/17, because the test is less sensitive to specific design features and it could be performed without disassembling parts. Moreover, GRSP discussed GRSP-56-38 and GRSP-56-39, superseding respectively ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30.
8. The expert from EC introduced ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30, submitted by the Task Force on Bumper Test Area (TF-BTA), a subgroup of the Informal Working Group on global technical regulation No. 9 – Phase 2, and proposing an amendment to the provisions of the bumper test. He explained that the current provisions allow the area to be narrower than intended in the provisions of the UN GTR. He added that ECE/TRANS/WP.29/GRSP/2014/17 was proposing a new method by introducing a practical determination of angle surfaces, to be tested with the FlexPLI, by using a corner gauge. Moreover, he explained that ECE/TRANS/WP.29/GRSP/2014/30 was proposing the introduction of the definition of rigid bumper beam in the test area in addition to the above-mentioned new test method. He finally informed GRSP that a test report on research conducted by EC on this issue was available. The expert from Japan gave a presentation (GRSP-56-03) to support ECE/TRANS/WP.29/GRSP/2014/17. The expert from Korea presented GRSP-56-20 supporting ECE/TRANS/WP.29/GRSP/2014/30. The expert from OICA introduced GRSP-56-30, supporting the new method as proposed by ECE/TRANS/WP.29/GRSP/2014/17, because the test is less sensitive to specific design features and it could be performed without disassembling parts. Moreover, GRSP discussed GRSP-56-38 and GRSP-56-39, superseding respectively ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30.
9. GRSP endorsed GRSP-56-39, but did not support GRSP-56-38. The secretariat was requested to distribute GRSP-56-39 with an official symbol for consideration at its May 2015 session. It was agreed that this proposal would be discussed further by the Contracting Parties under the 1998 Agreement and by GRSP at its next session as a full package with: (i) an updated draft proposal of Phase 2 of the UN GTR (ECE/TRANS/WP.29/GRSP/2014/15) and (ii) an updated final report of the IWG (ECE/TRANS/WP.29/GRSP/2014/16).
8. The expert from EC introduced ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30, submitted by the Task Force on Bumper Test Area (TF-BTA), a subgroup of the Informal Working Group on global technical regulation No. 9 – Phase 2, and proposing an amendment to the provisions of the bumper test. He explained that the current provisions allow the area to be narrower than intended in the provisions of the UN GTR. He added that ECE/TRANS/WP.29/GRSP/2014/17 was proposing a new method by introducing a practical determination of angle surfaces, to be tested with the FlexPLI, by using a corner gauge. Moreover, he explained that ECE/TRANS/WP.29/GRSP/2014/30 was proposing the introduction of the definition of rigid bumper beam in the test area in addition to the above-mentioned new test method. He finally informed GRSP that a test report on research conducted by EC on this issue was available. The expert from Japan gave a presentation (GRSP-56-03) to support ECE/TRANS/WP.29/GRSP/2014/17. The expert from Korea presented GRSP-56-20 supporting ECE/TRANS/WP.29/GRSP/2014/30. The expert from OICA introduced GRSP-56-30, supporting the new method as proposed by ECE/TRANS/WP.29/GRSP/2014/17, because the test is less sensitive to specific design features and it could be performed without disassembling parts. Moreover, GRSP discussed GRSP-56-38 and GRSP-56-39, superseding respectively ECE/TRANS/WP.29/GRSP/2014/17 and ECE/TRANS/WP.29/GRSP/2014/30.
9. GRSP endorsed GRSP-56-39, but did not support GRSP-56-38. The secretariat was requested to distribute GRSP-56-39 with an official symbol for consideration at its May 2015 session. It was agreed that this proposal would be discussed further by the Contracting Parties under the 1998 Agreement and by GRSP at its next session as a full package with: (i) an updated draft proposal of Phase 2 of the UN GTR (ECE/TRANS/WP.29/GRSP/2014/15) and (ii) an updated final report of the IWG (ECE/TRANS/WP.29/GRSP/2014/16).
5. The expert from Germany, on behalf of the Chair of the IWG, informed GRSP that the group had met on 24 November 2017. As a result of this meeting, he was able to introduce the consolidated text of draft Amendment 2 to UN GTR No. 9 (GRSP-62-15-Rev.1), incorporating: (a) the flexible pedestrian legform impactor (FlexPLI) (ECE/TRANS/WP.29/GRSP/2014/15), (b) the new bumper test area (ECE/TRANS/WP.29/GRSP/2015/2) and the removal of the study reservation on the Injury Assessment Values (IARVs) (ECE/TRANS/WP.29/GRSP/2017/3). He also introduced the progress report of the IWG (GRSP-62-16) superseding ECE/TRANS/WP.29/GRSP/2014/16. GRSP was not yet in the position to adopt the proposal and requested the secretariat to distribute GRSP-62-15-Rev.1 and GRSP-62-16 with official symbols for final review at its May 2018 session. Moreover, GRSP requested the IWG to draft Addendum 3 to Mutual Resolution No. 1 of the 1958 and the 1998 Agreements to provide drawings and technical specifications of the FlexPLI. GRSP also requested the IWG to liaise with the FlexPLI manufacturer to have free availability of the above-mentioned technical information. Finally, GRSP agreed to seek endorsement from WP.29 and the Executive Committee of the 1998 Agreement (AC.3) at their March 2018 sessions to extend the mandate of the IWG by one year.