In document GRSG/2014/22, the EC proposes to align Annex 11 of UN R107 with Regulation (EU) 1230/2012 (type approval of vehicles with regard to their masses and dimensions). However, the volume and location of masses – including baggage masses – impacts many basic parameters of buses like total mass in running order, axle loads, CG position, etc. and related UN Regulations. This document raises issues for consideration during the review of the EC proposal.
7. GRSG considered ECE/TRANS/WP.29/GRSG/2014/22, tabled by the expert from EC, to align Annex 11 of the UN Regulation with Regulation (EU) 1230/2012. The expert from Hungary introduced GRSG-107-04 (for information only) arguing that ECE/TRANS/WP.29/GRSG/2014/22 did not correctly addressing the issue of volume and location of the masses. The expert from OICA introduced GRSG-107-19, amending ECE/TRANS/WP.29/GRSG/2014/22. Finally, GRSG adopted ECE/TRANS/WP.29/GRSG/2014/22 as amended below. The secretariat was requested to submit it to WP.29 and AC.1 for consideration and vote at their March 2015 sessions, as draft Supplement 3 to the 05 series of amendments and as Supplement 3 to the 06 series of amendments to the UN Regulation.
Annex 11,
Paragraph 3.2.3.2.1., amend to read:
| “3.2.3.2.1. | The vehicle in running order … … B (kg), declared by the manufacturer, shall have a numeric value not less than 100 x V. V is the total volume of baggage compartments in m3 including exterior racks, ski-boxes and baggage compartments, that are attached to the outside of the vehicle. BX, declared by the manufacturer, shall have a numeric value not less than 75 kg/m2… …” |
| GRSG/2014/22 |