Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure (per the updates and transfer of the device specification from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1)).
19. As per paragraphs 10, 12, 13 and 17, GRSG adopted ECE/TRANS/WP.29/GRSG/2024/26 not amended. The secretariat was requested to submit the proposal as Supplement 2 to the original version of UN Regulation No. 167 and as part of (see paragraph 18 above) of the 01 series of amendments to the UN Regulation for consideration and vote at the November 2024 sessions of WP.29 and AC.1.
42. The expert from the Netherlands, Chair of TF on three dimensional “H” (3-D "H) point machine, informed GRSG that TF (with the participation of experts of GRSP) had prepared a new addendum (GRSG-126-20) to the Mutual Resolution No. 1 to be discussed at the December 2023 session of GRSP. He explained that the proposal included specifications and the calibration procedure of the 3-D “H”-point machine, the procedure for determining the point “H”, and the actual torso angle for seating positions in motor vehicles which would be used in all referenced UN Regulations and GTRs. GRSG agreed that TF would prepare amendments proposals for the March 2024 session of GRSG to UN Regulations Nos. 35, 43, 46, 125, 166 and 167 and UN GTR No. 6 in the remit of GRSG which would move the references from R.E.3 and from the text of the UN GTR No. 6 to M.R.1. It was also agreed that the authorization to develop the amendments to UN GTRs Nos. 6, 7 and 14 would be coordinated with GRSP would be submitted at the March 2024 session of the Executive Committee of the 1998 Agreement (AC.3). Th aim was to have a complete set of amendments to UN Regulations, UN GTRs and M.R.1 at the November 2024 sessions of WP.29, AC.1 and AC.3.
| GRSG-126-20 |