Proposal to amend para. 22.33.5. to expand the list of series of amendments under which type approvals remain valid to include the 02 and 03 series, provided the transitional provisions of the respective preceding series permit it.
Proposal to amend para. 2.7. and Figure 1a to clarify the definition of external original surface, insert new para. 2.10. to define protruding support, insert new para. 2.11. to define opaque obscuration, amend para. 6.1.1.6. to reference the external original surface and Figure 1a, amend para. 6.1.1.9. to specify mounting height requirements for mirrors, insert new para. 6.1.1.10. to establish requirements for protruding supports when the device is in folded position, amend para. 6.2.2.1.4. regarding hardness exemptions for camera and monitor parts, amend para. 6.2.2.1.5. to add exemptions for interior components and clarify CMS requirements, insert new para. 6.2.2.1.6. to clarify CMS mounting height requirements, amend para. 6.3.2. to specify exterior devices not requiring impact testing, amend para. 6.3.2.1.1. and Figure 1c regarding pendulum test rig specifications, amend para. 6.3.2.2.5. to address displacement of impact point, amend para. 12.6. to define ocular reference point, insert new para. 12.10. with a table listing devices not required for overall width determination, amend para. 15.1.4. regarding fields of vision establishment, amend para. 15.2.2.6. regarding projection limits for devices less than 2 m high, amend para. 15.2.4.4.2. and Figure 7 regarding wide-angle view device specifications, amend para. 15.2.4.9.1. to clarify obstruction calculations for Class I devices, amend para. 15.2.4.9.2. to address obstruction limits for Classes II through VII, amend para. 16.1.1.3. to establish overlay requirements, amend para. 16.1.1.3.1. to define safety-related rearward indirect vision information, amend Annex 5 approval mark examples to reflect the 08 series, reorganize transitional provisions in para. 22, delete former para. 22.24., 22.25., 22.31., 22.32., 22.33.6., and 22.33.7., renumber existing transitional provision paragraphs, and insert new para. 22.347. with transitional provisions for the 08 series specifying that as from 1 September 2030, Contracting Parties shall not be obliged to accept type approvals to preceding series first issued after that date, and as from 1 September 2032, shall not be obliged to accept type approvals to any preceding series.
Proposal to amend para. 2.3. to clarify that devices mandated by other UN Regulations are not seen as surveillance camera-monitor-recording devices if not explicitly mentioned in the respective other Regulation. The definition has existed since Supplement 2 to the 04 series entered into force on 18 June 2016. Camera-based systems have become widely used for fulfilling reversing motion monitoring requirements of UN R158, creating unintended regulatory overlap. The 07 series of amendments clarified this distinction, but the 06 series did not. The proposal introduces the same clarification into the 06 series and improves legal certainty and consistency across amendment series without introducing new technical requirements or affecting the current level of safety.
Status report on the Informal Working Group on Event Data Recorder and Data Storage System for Automated Driving. The IWG has developed requirements for UN R157, UN R185/GTR, UN R160, and UN R169. DSSAD activities will be removed from the IWG on EDR/DSSAD and assumed by a new IWG on ADS2, pending WP.29 decision. EDR Step 2 work includes proposals for a 03 Series of Amendments to UN R160 and Supplement 3 to UN R169. EDR Step 3 will consider data survivability, triggering sensitivity, data elements, and EDR for category L vehicles, with a proposal planned for April 2027.
Draft text pursuant to the teleconference discussion.