Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Proposal from the informal group on UN Regulation No. 55 to introduce provisions for coupling applications in multi-vehicle combinations ( e.g. rigid truck + dolly + semi-trailer) presently not addressed by the regulation.

Further refinements from the informal group on UN Regulation No. 55 to introduce provisions for modular vehicle combinations (e.g., rigid truck + semi-trailer + dolly). This proposal concerns a procedure to identify allowable combinations of performance values Dc and V for drawbar coupling equipment.

Quick review of the informal group’s anticipated schedule for completing its work on updating the regulation on mechanical couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. Therefore, Germany proposes the establishment of an informal working group to develop a new regulations (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

One of the outcomes of the work on updating UN R55 was the recognition that agricultural couplings present a set of challenges distinct from other vehicles. This revised proposal takes into account comments received during the February 2016 GRRF session for the establishment of an informal working group to develop a new regulation (UN R55-A) to respond to the specific needs of agricultural vehicle couplings.

Proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.

Revised proposal to ensure that coupling balls do not block rear lighting and/or registration plates. In line with the EU General Safety Rule, Annex IV specification for application of UN R55, couplings that might block lighting or plates must be removable, repositionable, and unlockable in order to make it easier for users to remove them or reposition them when not in use (e.g., towing a trailer.) Coupling balls that are so designed as to be unable to block lighting or plates may still incorporate locks and/or require tools to remove or reposition.