previous meeting | next meeting |
1. | Welcome and Introductions |
PMP-30-01 | Draft agenda for the 30th PMP informal group session
|
||
2. | Sub 23nm presentation |
PMP-30-02 | PMP: Sub 23 nm measurement recommendations
PMP-30-09 | Review on engine exhaust sub-23 nm particles
Draft copy for PMP informal group comment of the JRC Science and Policy Report.
|
||
3. | Regeneration (light duty) |
PMP-30-07 | Particle measurement during regeneration of GPF and DPF
Discussion presentation on issues potentially impacting the measurement of PN during regeneration of gasoline particulate filters and diesel particulate filters on light-duty vehicles.
PMP-30-03 | Particle measurement: Regeneration issues
|
||
4. | Calibration status |
PMP-30-04 | PMP: Volatile Particle Remover calibration issues
PMP-30-10 | Volatile Particle Remover Calibration and Validation Procedures
This document describes the calibration and validation procedures for the VPR. Calibration of the VPR is to be performed at the point of manufacture and validation is to be performed at least at 6 month intervals for all instruments without automatic temperature sensors or at least at 12 month intervals if automatic temperature sensors are present. The calibration procedure must be repeated if the system ‘fails’ its validation procedure or the particle number measurement system is modified in any way.
PMP-30-12 | PMP draft recommendations for <23nm measurements
|
||
5. | EMRP-ENV-02 |
PMP-30-11 | Measuring soot particles from automotive exhaust emissions
Summary of the PN calibration project under the European Metrology Research Programme's project on "emerging requirements for measuring pollutants from automotive exhaust emissions" (EMRP ENV-02).
|
||
6. | NRMM |
PMP-30-08 | Potential Issues Related to the Measurement of PN During Regeneration of NRMM
|
||
7. | Non-Exhaust Particles |
PMP-30-05 | Particulate matter emissions from tyres and brakes: Main facts and open issues
Review of findings from the review of literature on particle emissions from non-exhaust sources covering tires and brake materials.
PMP-30-06 | Presentation on REBRAKE program
Presentation on <a href="http://www.rebrake-project.eu/Pages/home.aspx" target="_blank">REBRAKE, the European Commission-supported project</a> to better understand brake-wear emissions and their impact on air quality.
PMP-30-13 | VTI presentation: Non-exhaust particles
Presentation on Swedish and Scandinavian research into sources and impact of non-exhaust airborne particles, including from wear on roads, tires, brakes, and similar sources.
|
||
8. | Next meeting |