GRE/2013/40 | Provisional agenda for the 70th GRE session

GRE/2013/40/Add.1 | Addendum to the provisional agenda for the 70th GRE session

GRE-70-37 | Updated provisional agenda for the 70th GRE session

GRE/2013/40/Add.2 | Addendum 2 to the provisional agenda for the 70th GRE session

GRE/70 | Report of the GRE on its 70th session

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-27 | Proposal for Correction to document GRE/2013/50 Proposal to retroactively extend the clarifications to the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps" to the 04 and 05 series amendments to Regulation No. 48.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-70-42 | Proposal to amend the dipped-beam headlamp-aiming provisions of document GRE/2013/57 Proposal to expand the tolerances proposed for the initial aiming of dipped-beam headlamps in order to encompass all vehicle configurations and conform to the practical constraints of vehicle mass production.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-70-27 | Proposal for Correction to document GRE/2013/50 Proposal to retroactively extend the clarifications to the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps" to the 04 and 05 series amendments to Regulation No. 48.

GRE-70-47 | Status report of the GTB Light Sources working group

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE/2013/50 | Proposal for Supplement 4 to the 06 Series of Regulation No. 48 Proposal to clarify the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps".

GRE/2013/51 | Proposal for Supplement 4 to the 06 Series of Regulation No. 48 Proposal to reduce the minimum speed for activation of E-class passing beams from 70 km/h to 60 km/h and to prescribe clear alternatives to either detect motorway conditions with sensors or only activate the E mode above a speed of 110km/h. Moreover, the proposal extends the provisions to all vehicles.

GRE/2013/2 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Submitted by the Netherlands to introduce a mandatory requirement for fitting an operating tell-tale on the daytime running lamp, in case the failure provision (for the light sources) according to paragraph 7.4.2.(b) of UN Regulation No. 87 is applied.

WP.29/2011/99 | Proposal for Supplement 8 to the 04 series of amendments to Regulation No. 48 Proposal concerning the retention of headlamp initial aiming. Due to reservations raised over the unusually long transition periods, this proposal was returned to the Working Party on Lighting and Light-signalling for further consideration.

WP.29/2011/99/Corr.1 | Corrigenda to document WP.29/2011/99

WP.29/2011/99/Corr.2 | Proposal for Supplement 1 to the 06 series of amendments to Regulation No. 48 Corrections to the earlier proposal revising the title from "Supplement 8 to the 04 series" to read "Supplement 1 to the 06 series" and changing "90 months" read "84 months".

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE-70-11 | Proposal for a supplement to the 02 series of amendments to Regulation No. 7 Proposal to clarify that in the case of a stop lamp, the failure indicator of paragraph 6.1.7.2. is a "failure tell-tale" rather than an "operating tell-tale". This proposal complements the similar proposal for Regulation No. 48 contained in informal document GRE-70-09.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-70-10 | Proposal for a supplement to the original version to Regulation No. 87 Given the mandatory requirement for a daylight running lamp tell-tale, this proposal replaces the word "operating" with the word "failure" in describing the failure tell-tale of paragraph 7.4.2.(b). This proposal complements the similar proposal for Regulation No. 48 contained in informal document GRE-70-09.

GRE-70-20 | Proposal for amendments to document GRE/2013/50 Proposal to restructure the definitions and requirements associated with the installation of “single lamps”, “lamps marked D” and “interdependent lamps” as proposed by GTB. OICA agrees with the principle, but proposes changes to the placement of the definitions within the rule.

GRE-70-19 | Proposal for amendments to Regulation 48 Series of proposals to revise the positioning specifications for direction indicators, marker lamps, and reflectors on trailers (O category) and to make clarifications.

GRE-70-27 | Proposal for Correction to document GRE/2013/50 Proposal to retroactively extend the clarifications to the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps" to the 04 and 05 series amendments to Regulation No. 48.

GRE-70-28 | Proposal for Correction to document GRE/2013/51 Proposal to extend to the the 04 and 05 series amendments to Regulation No. 48 the proposed reduction in the minimum speed for activation of E-class passing beams from 70 km/h to 60 km/h and to prescribe clear alternatives to either detect motorway conditions with sensors or only activate the E mode above a speed of 110km/h.

GRE-70-09/Rev.1 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Revised proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-70-35 | Proposal for additions to document GRE/2013/50 Following discussions with OICA, GTB proposes improvements to the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps".

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-40 | Proposal to amend document GRE/2013/57 on headlamp aiming/leveling OICA proposal to amend Poland's proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling.

GRE-70-41 | Presentation on the proposal for alternative headlamp aiming/leveling under Regulation No. 48 Presentation in support of document GRE/2013/57 proposing to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling.

GRE-70-42 | Proposal to amend the dipped-beam headlamp-aiming provisions of document GRE/2013/57 Proposal to expand the tolerances proposed for the initial aiming of dipped-beam headlamps in order to encompass all vehicle configurations and conform to the practical constraints of vehicle mass production.

GRE-70-41/Rev.1 | Presentation on the proposal for alternative headlamp aiming/leveling under Regulation No. 48: Revised Revised presentation in support of document GRE/2013/57 proposing to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE-70-27 | Proposal for Correction to document GRE/2013/50 Proposal to retroactively extend the clarifications to the definitions and requirements associated with the installation of "single lamps", "lamps marked D" and "interdependent lamps" to the 04 and 05 series amendments to Regulation No. 48.

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-09/Rev.1 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Revised proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-70-19 | Proposal for amendments to Regulation 48 Series of proposals to revise the positioning specifications for direction indicators, marker lamps, and reflectors on trailers (O category) and to make clarifications.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-47 | Status report of the GTB Light Sources working group

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE/2013/39 | Proposal for supplement 3 to the 06 series of amendments to Regulation No. 48 Submitted by Germany and based on informal document GRE-68-30, proposing to delete the exemption for category M1 and N1 vehicles from the requirement for a minimum distance between the inner edges of two adjacent lighting surfaces.

GRE-70-47 | Status report of the GTB Light Sources working group

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-44 | GTB Mirror Working Group SAE: Status Update Status report on the GTB working group establish with SAE to assist NHTSA in the development of test protocols for adaptive driving beam (ADB) headlamps under FMVSS 108.

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE/2013/56 | Proposal for Supplement 8 to the 01 series of amendments to Regulation No. 74 Proposal to enable the optional use of hazard warning lamps on L1 category vehicles to alert other vehicles in case of breakdown or other situations that could lead to danger on the road. This proposal brings L1 category warning signal options in line with those for other 2-wheeled vehicles.

GRE/2013/43 | Proposal for collective amendments to Regulations Nos. 53 and 74 Proposal to delete references to obsolete Regulations Nos. 1, 8, 20, 56, 57, 72, 76 and 82.

GRE-70-32 | Proposal for amendment to IMMA proposal GRE/2013/56 IMMA correction (of an oversight on inclusion of the colors of the lights from R53 to ensure complete alignment of UN R74 with R53) to its proposal to enable the optional use of hazard warning lamps on L1 category vehicles to alert other vehicles in case of breakdown or other situations that could lead to danger on the road.

GRE/2013/43 | Proposal for collective amendments to Regulations Nos. 53 and 74 Proposal to delete references to obsolete Regulations Nos. 1, 8, 20, 56, 57, 72, 76 and 82.

GRE/2013/18 | Proposal for collective amendments to Regulations Nos. 48 and 112 Text prepared by Germany with support from The Netherlands, to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize this with operating voltage requirements in UN Regulation 48.

GRE/2013/62 | Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 112 Proposal to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48. This document supersedes document WP.29/2013/18.

GRE-70-17 | Clarification of document GRE/2013/62 concerning electronic light source control gear Clarification of the proposal to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48

GRE-70-34 | Proposed alternatives to document GRE-70-17, concerning electronic light source control gear Proposal to improve the clarifications proposed regarding the requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48

GRE/2013/44 | Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 112 Proposal to amend document GRE/2013/18 (on aligning UN R48 with UN R112) and establishing limits for minimum and maximum voltages values.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE/2013/45 | Proposal for Collective amendments to Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123 Proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE-70-12 | Editorial corrections to document GRE/2013/55 Editorial correction to the presentation of the collective amendments to selected lighting regulations proposed in document GRE/2013/55.

GRE/2013/55 | Proposal for collective amendments to Regulations Nos. 3, 4, 6, 7, 19, 23, 38, 50, 77, 87, 91, 98, 104, 112, 113, 119 and 123 Proposal to reference the requirements for installation contained in Regulations Nos. 48, 53, 72 and 86 into the Regulations 3, 4, 6, 7, 19, 23, 38, 50, 77, 87, 91, 98, 104, 112, 113, 119 and 123.

GRE-70-21 | Proposal for amendment to document GRE/2013/55 Proposal to revise the Italian proposal in order to clarify that the requirements pertain only to characteristics verifiable directly on each lamp in order to avoid confusion with characteristics that can only be verified on the vehicle after installation.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-34 | Proposed alternatives to document GRE-70-17, concerning electronic light source control gear Proposal to improve the clarifications proposed regarding the requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48

GRE-70-12 | Editorial corrections to document GRE/2013/55 Editorial correction to the presentation of the collective amendments to selected lighting regulations proposed in document GRE/2013/55.

GRE-70-07 | Proposal for corrections to document GRE/2013/48 Editorial revision of the proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE/2013/61 | Proposal for Supplement 26 to the 01 series of amendments to Regulation No. 6 Revised proposal from France and Germany to introduce provisions for direction indicator lamps with variable apparent surfaces. This document supersedes document GRE/2013/13.

GRE/2013/47 | Proposal for Supplement 26 to the 01 Series of Regulation No. 6 and Supplement 4 to the 06 Series of Regulation No. 48 Proposal to introduce "interdependent lamps" into Regulation No.6, taking into account the function of direction indicators as hazard warning signals.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-05 | Proposal for corrections to document GRE/2013/47 Editorial corrections to the proposal to introduce "interdependent lamps" into Regulation No. 6, taking into account the function of direction indicators as hazard warning signals, and including amendments to Regulation No. 48.

GRE-70-16 | Dynamic Turn Indicator: Research/Investigation Findings Summary of test results to assess human responses to variable intensity direction indicators under various driving conditions.

GRE-70-24 | Proposal for Correction to document GRE/2013/47 Proposal to extend the proposed amendment to introduce "interdependent lamps" to the 04 and 05 series of amendments to Regulation No. 48.

GRE-70-43 | Proposal to amend the provisions for variable direction indicator lamps in document GRE/2013/61 Proposal to improve the draft text prepared in order to introduce provisions for direction indicator lamps with variable apparent surfaces.

GRE-70-46 | Examples of strange direction indicators according to document GRE/2013/61 Presentation highlighting concern over permissible indicator patterns under the proposed provisions for direction indicator lamps with variable apparent surfaces.

GRE/70 | Report of the GRE on its 70th session

GRE-70-36 | OICA comments on document GRE-70-09 concerning tell-tales OICA comments on the Dutch proposal to revise definitions and specifications concerning "operating" and "failure" tell-tales under UN R48.

GRE-70-09 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE/2013/57 | Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48 Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE/2013/60 | Proposal for Supplement 13 to the 04 series of amendments, Supplement 6 to the 05 series of amendments, Supplement 4 to the 06 series of amendments to Regulation No. 48 Proposal to amend UN R48 in order to enable type-approval of direction indicators with variable apparent surfaces.

GRE-70-09/Rev.1 | Proposal for a supplement to the 06 Series of amendments to Regulation No. 48 Revised proposal to introduce the following into Regulation No. 48: a) General definition of ‘tell-tale’, as also currently defined in Regulation No. 121; b) Requirement that the specifications of the tell-tale (location, identification, symbol, illumination and colour) shall meet the relevant requirements of Regulation No. 121; c) Provision that tell-tales shall always provide an optical signal, thus aligning with Regulation No. 121; however, it is suggested to allow additional signals (auditory or any equivalent signal); d) New definition of a ‘failure tell-tale’ and stating the mandatory presence of such tell-tale for the daytime running lamp in certain cases; e) Editorial changes clarifying the situation for a few other cases in Regulation No. 48, where apparently also a ‘failure tell-tale’ was meant.

GRE-69-14 | New approach for lighting regulations EC proposal to overhaul the system of 41 lighting regulations to minimize design-specific criteria (and thus the constant flow of rule revisions and overlap among rules) by focusing on performance requirements.

GRE-66-13 | Draft revised Regulation No. 87 as adapted under the Horizontal Reference

GRE-66-14 | Working draft of the Horizontal Reference Document for lighting equipment

GRE/2013/42 | Proposal for Supplement 22 to the 02 series of amendments to Regulation No. 7 Proposal to increase the maximum intensity limit for front position lamps in cases where front position lamps are reciprocally incorporated with front fog lamps.

GRE/2013/48 | Proposal for Supplement 24 to the 02 Series of Regulation No. 7 Proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE-70-07 | Proposal for corrections to document GRE/2013/48 Editorial revision of the proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE/70 | Report of the GRE on its 70th session

GRE/2013/42 | Proposal for Supplement 22 to the 02 series of amendments to Regulation No. 7 Proposal to increase the maximum intensity limit for front position lamps in cases where front position lamps are reciprocally incorporated with front fog lamps.

GRE-70-07 | Proposal for corrections to document GRE/2013/48 Editorial revision of the proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE-70-12 | Editorial corrections to document GRE/2013/55 Editorial correction to the presentation of the collective amendments to selected lighting regulations proposed in document GRE/2013/55.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE/2013/44 | Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 112 Proposal to amend document GRE/2013/18 (on aligning UN R48 with UN R112) and establishing limits for minimum and maximum voltages values.

GRE/2011/35 | Proposal for amendment to Regulation No. 112 Proposal to update the 'resistence to atmospheric agents' test by applying the spectral energy distribution of sunlight as defined in CIE Publication No. 85:1989, Table 4.

GRE-70-18 | Comments on the proposal to update resistance to atmospheric agents testing under Regulation No. 112 In document GRE/2011/35, China proposed to update the ‘resistance to atmospheric agents’ test under UN R112 by applying the spectral energy distribution of sunlight as defined in CIE Publication No. 85:1989, Table 4. Following up on its initial response (document GRE-68-41), SAE explains its opposition to the proposal.

GRE/2013/62 | Proposal for Supplement 6 to the 01 series of amendments to Regulation No. 112 Proposal to introduce requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48. This document supersedes document WP.29/2013/18.

GRE-70-12 | Editorial corrections to document GRE/2013/55 Editorial correction to the presentation of the collective amendments to selected lighting regulations proposed in document GRE/2013/55.

GRE-70-34 | Proposed alternatives to document GRE-70-17, concerning electronic light source control gear Proposal to improve the clarifications proposed regarding the requirements to avoid intentional non-approved (voltage) variation of the principal passing beam, using halogen light sources and to harmonize them with the operating voltage requirements in UN Regulation No. 48

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE/2013/41 | Proposal for Supplement 1 to the 05 series of amendments to Regulation No. 10 Proposal to amend document GRE/2013/3 and extend the scope of UN R10 to all power train systems above a certain working voltage level when they are in charging mode.

GRE-70-13 | Proposal to amend document GRE/2013/41 concerning UN Regulation No. 10 Proposal to clarify and reinsert provisions concerning the approval of electronic/electrical subassemblies related to lighting devices within the proposal to extend the scope of UN R10 to all power train systems above a certain working voltage level when they are in charging mode and and including type approval of separate electrical components for the “REESS charging mode coupled to power grid” configuration. [Note: Document GRE/2013/41 has been superseded by document GRE-70-14.]

GRE-70-14 | Proposal for Supplement 1 to the 05 series of amendments to Regulation No. 10 Proposal to amend document WP.29/2013/73 which has been submitted for the November 2013 WP.29 session in order to extend the scope of UN R10 to include all kinds of power train systems above a certain working voltage level, when they are in charging mode and including type approval of separate electrical components for the “REESS charging mode coupled to power grid” configuration. This document supersedes the previous amendment proposal (document GRE/2013/41).

GRE-70-15/Rev.1 | Proposal for the 05 series of amendments to Regulation No. 10: Revised Consolidated version (97 pages) of the amendments to UN R10 presented in documents WP.29/2013/73 (formal proposal of amendments pending before the November 2013 Forum session) and GRE-70-14 (revised proposal of further amendments superseding GRE/2013/41). This document is intended to supersede the formal proposal WP.29/2013/73.

GRE-70-31 | Proposal for amendments to ECE/TRANS/WP.29/GRE/2013/41 Correction to the French version of the proposal to extend the scope of UN R10 to all power train systems above a certain working voltage level when they are in charging mode.

GRE-70-33 | Proposal for amendments to document GRE-70-15 Editorial improvements to the consolidated version (97 pages) of the amendments to UN R10 proposed in documents WP.29/2013/73 (formal proposal of amendments pending before the November 2013 Forum session) and GRE-70-14.

GRE-70-15/Rev.2 | Proposal for the 05 series of amendments to Regulation No. 10: Second revision Revised consolidated version (98 pages) of the amendments to UN R10 presented in documents WP.29/2013/73 (formal proposal of amendments pending before the November 2013 Forum session) and GRE-70-14 (revised proposal of further amendments superseding GRE/2013/41). This document is intended to supersede the formal proposal WP.29/2013/73.

WP.29/2013/73 | Proposal for the 05 series of amendments to Regulation No. 10 GRE proposal to extend the scope of UN R10 to include all kinds of power train systems above a certain working voltage level, when they are in charging mode and including type approval of separate electrical components for the "REESS charging mode coupled to power grid" configuration.

GRE/2013/49 | Proposal for the 04 series of amendments to Regulation No. 27 Combined GTB and CLEPA proposal, superseding documents GRE/2011/46 and GRE/2012/25, to update UN R27 in line with technological progress and performance-based methodologies. The main changes are: a) Revised provisions to combine color boundaries for the night time color, b) Replacement of Illuminant C with Illuminant D65 in the measurement of fluorescent materials, c) Alternative methods introduced for instrumental measurement of the fluorescent color, d) New Annex 10 to replace reference to ISO 105, e) Clarification of the wind test (Annex 5), f) Standardization of the test surface representing the road, g) Simplification of the test device for clearance to the ground in Annex 3, h) Amendment of COP requirements, and i) 36-month transitional period in a new paragraph 14.

GRE/2013/58 | Proposal for Supplement 3 to the 03 series of amendments to Regulation No. 27 Proposal to clarify the Conformity of Production requirements.

GRE-70-03 | Proposal for correction to document GRE/2013/49 Corrections to the combined GTB and CLEPA proposal to update UN R27 in line with technological progress and performance-based methodologies.

GRE-70-25 | Proposal for Correction to document GRE/2013/49 Editorial corrections to the GTB and CLEPA proposal to update UN R27 in line with technological progress and performance-based methodologies.

GRE-70-26 | Warning triangle diagrams in support of document GRE-70-25 Diagrams further illustrating the corrections proposed in document GRE-70-25.

GRE/70 | Report of the GRE on its 70th session

GRE/2013/58 | Proposal for Supplement 3 to the 03 series of amendments to Regulation No. 27 Proposal to clarify the Conformity of Production requirements.

GRE/2013/52 | Proposal for Supplement 09 to the 00 Series of Regulation No. 65 Proposal to clarify the requirements for the special warning lamp while allowing for harmonization with the requirements for emergency warning lamps as prescribed by SAE.

GRE/2013/59 | Proposal for Supplement 10 to Regulation No. 65 Proposal to clarify the Conformity of Production requirements.

GRE-70-04 | Proposal for corrections to document GRE/2013/52 Editorial improvements to the proposal to clarify the requirements for the special warning lamp while allowing for harmonization with the requirements for emergency warning lamps as prescribed by SAE.

GRE/70 | Report of the GRE on its 70th session

GRE-70-01 | Proposed Terms of Reference and Rules of Procedure for the AVLI informal group Guidelines for the mandate of the expert group on Agricultural Vehicle Lighting Installation working on an overhaul of UN Regulation No. 86.

GRE/70 | Report of the GRE on its 70th session

GRE-70-23 | Consistency between the Convention on Road Traffic (1968) and Vehicle Technical Regulations Status of WP.1 reconciliation of the Vienna Convention with WP.29 technical regulations, especially with regard to automated systems.

GRE-69-15/Rev.1 | Discussion of IWVTA technical requirement priorities relevant to GRE: Revised

WP.29-156-21/Rev.1 | Proposal for candidate items for technical regulations applicable to IWVTA (revised) Document proposing regulations for inclusion in the pending regulation on International Whole Vehicle Type Approvals and providing guidance to the Working Parties in their respective reviews of this work.

GRE-70-08 | IEC comments on the proposed IWVTA technical requirement priorities Comments from IEC on the informal document GRE-69-15/Rev.1 ("Priority of Discussion on Technical Requirements for IWVTA and Draft Report to IWVTA Informal Meeting")

GRE-70-29 | OICA Comments on GRE candidate items for IWVTA OICA comments on document GRE-69-15/Rev.1 concerning the lighting regulations under consideration for inclusion in the International Whole Vehicle Type Approval (IWVTA) system.

GRE-70-30 | Proposal for Supplement 18 to the 00 series of amendments to Regulation No. 4 Proposal to add registration plates used in non-European Contracting Parties to the scope of the regulation. This document is based on the previous document GRE-69-23.

GRE-70-38 | Explanation of the proposal to amend UN Regulation No. 4 on rear registration plates As part of the work on establishing an International Whole Vehicle Type Approval (IWVTA) system, Japan has noted differences between European and Japanese vehicle registration (license) plates. Since UN R4 would be part of the IWVTA process, Japan seeks to add its plate requirements to the European requirements embodied in UN R4 in order to enable Japan to adopt this regulation and thereby adhere to the IWVTA.

GRE-70-45 | List of candidate regulations for inclusion within the IWVTA system Status of the lighting regulations listed for inclusion within the International Whole Vehicle Type Approval systems.

GRE-70-38 | Explanation of the proposal to amend UN Regulation No. 4 on rear registration plates As part of the work on establishing an International Whole Vehicle Type Approval (IWVTA) system, Japan has noted differences between European and Japanese vehicle registration (license) plates. Since UN R4 would be part of the IWVTA process, Japan seeks to add its plate requirements to the European requirements embodied in UN R4 in order to enable Japan to adopt this regulation and thereby adhere to the IWVTA.

GRE/2013/66 | Proposal for Supplement 6 to the 04 series of amendments to Regulation No. 19 Proposal to enable approval of Class B front fog lamp for replacement purposes only in the 04 series of amendments to UN R19 (as is currently the case for approvals under the 02 and O3 series).

GRE/2013/65 | Proposal for draft amendments to Regulation No. 104 Proposal to introduce a new Class F marking designed with chevron-type pattern to be applied to special utility vehicles or trailers not normally covered by standard contour marking materials in order to harmonize national requirements making use of such markings.

GRE/2013/64 | Proposal for draft amendments to Regulation No. 70 Proposal to introduce new Class 5 devices made solely of retro-reflective plates with chevron type pattern to be applied to special utility vehicles or trailers not regularly covered by standard rear marking plates in order to harmonize existing national requirements.

GRE/2013/63 | Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 123 Proposal to correct the text by replacing the erroneous use of the term "principal passing beam" with the correct term "class C (basic) passing beam".

GRE/2013/46 | Proposal for Supplement 16 to the 02 Series of Regulation No. 3 Proposal to delete the shape requirements for retro-reflecting devices, except for triangles.

GRE/2013/53 | Proposal for Supplement 4 to the 01 Series of Regulation No. 113 Proposal to improve the accuracy of test procedures measuring the stability of the photometric performance, including replacement of the test point HV with points 0.50U/1.5L and 0.50U/1.5R and of percentage values for the heat test at these points with an absolute value of 225cd.

GRE/2013/54 | Proposal for Supplement 6 to the 01 Series of Regulation No. 123 Proposal to update the photometric test requirements for type approval of the AFS driving beam.

WP.29/2013/75 | Proposal for Supplement 6 to the 04 series of amendments to Regulation No. 19 Proposal to complete the deletion of distributed lighting systems (DLS), or rather light generators, from the regulation and to update the Conformity of Production (CoP) requirements

WP.29/2013/75/Add.1 | Proposal for Supplement 6 to the 04 series of amendments to Regulation No. 19 Addendum to clarify the context of document WP.29/2013/75 (the proposal to complete the deletion of distributed lighting systems (DLS), or rather light generators, from the regulation and to update the Conformity of Production (CoP) requirements).

GRE-70-06 | Proposal for Supplement 4 to the 01 Series of Regulation No. 113 Proposal to specify that headlamps producing only a driving beam are subject to testing of the resistance to mechanical deterioration of the plastic lens surface. The current text only specifies procedures for the passing beam.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE/2013/53 | Proposal for Supplement 4 to the 01 Series of Regulation No. 113 Proposal to improve the accuracy of test procedures measuring the stability of the photometric performance, including replacement of the test point HV with points 0.50U/1.5L and 0.50U/1.5R and of percentage values for the heat test at these points with an absolute value of 225cd.

GRE/2013/46 | Proposal for Supplement 16 to the 02 Series of Regulation No. 3 Proposal to delete the shape requirements for retro-reflecting devices, except for triangles.

GRE-70-22 | Request for correction of amendments to Regulations No. 4, 6, 7, 23, 38, 50, 77, 87, 91, and 119 The European Commission, pursuant to concerns raised in its Technical Committee Motor Vehicles, raises issues with two paragraphs that are reproduced in a number of GRE proposals set for consideration at the November WP.29. The EU, therefore, cannot vote to adopt the proposals until these concerns have been addressed (i.e., for the March 2014 session).

WP.29/2013/69 | Proposal for Supplement 17 to Regulation No. 4 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production requirements (CoP).

WP.29/2013/71 | Proposal for Supplement 25 to the 01 series of amendments to Regulation No. 6 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production requirements (CoP).

WP.29/2013/72 | Proposal for Supplement 23 to the 02 series of amendments to Regulation No. 7 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

WP.29/2013/76 | Proposal for Supplement 20 to Regulation No. 23 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

WP.29/2013/79 | Proposal for Supplement 17 to Regulation No. 38 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

WP.29/2013/83 | Proposal for Supplement 17 to Regulation No. 50 Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources.

WP.29/2013/87 | Proposal for Supplement 17 to Regulation No. 77 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources, and to update the Conformity of Production (CoP) requirements.

WP.29/2013/88 | Proposal for Supplement 18 to Regulation No. 87 GRE proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

WP.29/2013/89 | Proposal for Supplement 16 to Regulation No. 91 Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

WP.29/2013/94 | Proposal for Supplement 4 to the 01 series of amendments to Regulation No. 119 Proposal to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources and to update the Conformity of Production (CoP) requirements.

GRE-70-39 | Proposed amendments addressing GRE-70 agenda item 14c concerning non-replaceable filament lamps UK proposal to address concerns raised in the series of proposals to insert provisions for the use of incandescent light sources in the case of light source modules and lamps with non-replaceable light sources.

GRE/2013/48 | Proposal for Supplement 24 to the 02 Series of Regulation No. 7 Proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE-70-07 | Proposal for corrections to document GRE/2013/48 Editorial revision of the proposal to clarify the intensity ratio requirement for stop lamps reciprocally incorporated with position or rear-end outline marker lamps.

GRE/2013/42 | Proposal for Supplement 22 to the 02 series of amendments to Regulation No. 7 Proposal to increase the maximum intensity limit for front position lamps in cases where front position lamps are reciprocally incorporated with front fog lamps.

GRE-70-02 | Proposal for corrections to document GRE/2013/45 Recommended corrections to the proposal to clarify the definition of "type" with regard to manufacturer, trade names and marks as used in Regulations Nos. 4, 6, 7, 19, 23, 38, 45, 50, 77, 87, 91,98 ,104, 112, 113, 119 and 123.

GRE-70-38 | Explanation of the proposal to amend UN Regulation No. 4 on rear registration plates As part of the work on establishing an International Whole Vehicle Type Approval (IWVTA) system, Japan has noted differences between European and Japanese vehicle registration (license) plates. Since UN R4 would be part of the IWVTA process, Japan seeks to add its plate requirements to the European requirements embodied in UN R4 in order to enable Japan to adopt this regulation and thereby adhere to the IWVTA.

WP.29/2012/119 | New approach to lighting and light-signalling in UN Regulations Introduction to GTB initial thoughts on restructuring UN lighting regulations to focus on performance requirements rather than on design and technical descriptions.

GRE-70-44 | GTB Mirror Working Group SAE: Status Update Status report on the GTB working group establish with SAE to assist NHTSA in the development of test protocols for adaptive driving beam (ADB) headlamps under FMVSS 108.

GRE-70-47 | Status report of the GTB Light Sources working group