Consolidated reference version of the Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

“First draft” of the proposed calendar of meetings for the World Forum, the various Working Parties, and the administrative/executive committees for 2013, pending comments from Forum stakeholders.

Listing of currently active working groups and their chairpersons, highlighting full scope of WP.29 activities beyond the six permanent working groups.

Guidance from the UN Office of Legal Affairs defining the criteria for qualifying a proposal as a corrigendum (correction) to a regulatory text (as opposed to proposals for amendments that would substantially change a regulation).

Proposal from the Forum secretariat to correct errors found in Annex 1, item 21 and Annex 9, Appendix 4 of UN R13-H on light vehicle braking.

Chart of UNECE activities, including those of the World Forum/WP.29, related to the UN’s “Decade of Action for Road Safety” initiative.

The reference at the end of the last line of paragraph 5.3.2. in Annex 6 of UN R13-H: Revision 2 should refer to footnote 9 instead of footnote 8. This proposal by the Forum secretariat would correct the error.

Submission prepared by the United States outlining the background, scope, objectives, and organization of the proposed effort to develop harmonized pedestrian alert sound requirements for electric and hybrid-electric vehicles via a new UN global technical regulation.

Presentation requesting guidance over whether UN Regulations can address aftermarket lighting products, noting that Article 28 of the EU Framework Directive 2007/46/EC mandates that all products must comply with relevant regulatory requirements.

Letter from the SAE International CEO David Schutt reiterating his organization’s support for harmonized regulatory standards and the use of references to SAE standards, and commitment to ensuring the availability of these standards.

Submission of the Working Party on Brakes and Running Gear (GRRF) amending provisions concerning the brake drum “bedding in” procedures proposed in document WP.29/2012/4 (Proposal for Supplement 1 to the 02 series of amendments to
Regulation No. 90).

Activity summary and background information from the informal working group developing the flexible pedestrian lower legform impactor (Flex-PLI) to enhance the global technical regulation on pedestrian safety.

Summary of decisions from the 74th session of the parent committee of the World Forum/WP.29. Of note, ITC recognized the need to reduce the administrative delays between the adoption of regulations in WP.29 and their official entry into force?

Review of initiatives to develop global technical regulations.

Agenda for the 20th session of the Intelligent Transport Systems informal working group, including design prinicples for advanced driver assist systems (ADAS).

Draft report from the Intelligent Transport Systems informal group session of March 2011.

Draft design principles developed by the International Harmonized Research Activities-Intelligent Transport Systems working group for control systems of advancded driver-assist systems (ADAS).

Proposal developed through the GTR7-Phase 2 informal group (BioRID II) to add a new section to the Consolidated Resolution on the Construction of Vehicles for “test devices” that would provide a cross-index of test tools referenced in UN Regulations and addenda to cover their specifications and use.

Letter from James A. Thomas, president of ASTM International, highlighting concerns over the embedding of private standards in UN regulations and recommending the incorporation of such standards by reference.

Voting table for consideration of US GHG and fuel economy regulations for inclusion in the Compendium of candidate global technical regulations during the 156th Forum session.

Voting table for consideration of US GHG and fuel economy regulations for inclusion in the Compendium of candidate global technical regulations during the 156th Forum session.

Proposal of regulations for inclusion in the International Whole Vehicle Type Approval regulation under development and guidelines to assist the Working Parties in reviewing the proposal, submitted by the informal groups on the future of the 1958 Agreement and on IWVTA.

Document proposing regulations for inclusion in the pending regulation on International Whole Vehicle Type Approvals and providing guidance to the Working Parties in their respective reviews of this work.

Presentation on the status of work on the International Whole Vehicle Type Approval regulation.

Draft introduction and executive summary prepared by the World Forum secretariat for the third edition of the “Blue Book” overview of WP.29 objectives, structure, and activities.

Anticipated project schedule for development of the Data Exchange for Type Approvals database.

Position of Japan concerning the further development of the International Whole Vehicle Type Approval system, including work on UN Regulations 34, 46, and 125 and possible support for GTR 6 (UN R43), WLTP GTR and UN R51.

Draft Terms of Reference for a Task Force Group under GRPE to develop a framework for terms, definitions and classifications regarding vehicle propulsion systems.

Rationale for the proposal to develop a new UN Regulation on recyclability of M1 and N1 vehicles to be annexed to the 1958 Agreement.

Presentation on European Union plans for enhancing and updating EU vehicle noise regulations to take effect from 2015 and 2018.

Table reviewing the status of the proposals adopted at the March 2012 World Forum session under the 1958 Agreement.

Third edition of the status of the agreement on periodic technical inspections as of 8 March 2012.

Report of the March 2012 sessions of the World Forum.

Listing of the regulatory areas currently under active development within the Forum.

Proposal to introduce improved wet grip and snow tire provisions adopted at the March 2012 Forum session as amended by paragraph 65 of the session report. (Click the meeting link to access the session report.)

Integrated into the regulation via Amendment 4 to Revision 7.

This proposal to establish a “bedding in” procedure was adopted at the March 2012 WP.29 session as amended by paragraph 64 of the session report. (Click the meeting link to access the report.)

Adopted by the Forum and integrated into the regulation via Revision 1.

Integrated into the regulation via Amendment 3 to Revision 6.

Adopted by the Forum and integrated into the Regulation via Revision 3.

Integrated into the regulation via Revision 3.

Integrated into the regulation via Amendment 3 to Revision 1.

Proposal to amend paragraph 10.9.2. to read “Rigid plastic panes (paragraph 2.6.1. of this Regulation), flexible plastic panes (paragraph 2.6.2. of this Regulation) and rigid plastic double glazed units shall be considered satisfactory from the point of view of the fire resistance test if the burn rate does not exceed 110 mm/min.”

Correction to the proposal for Corrigendum 1 to UN R50: Revision 2.

Correction to the proposal for Corrigendum 1 to UN R37: Revision 6.

Proposal for transitional provisions concerning the electronic stability control telltale and approval markings related to UN R121.

September 2011 notice of final NHTSA fuel consumption standards and final EPA carbon dioxide (CO2) emissions standards for Combination Tractors; Heavy-duty Pickup Trucks and Vans; and Vocational Vehicles, corresponding with the request to list these regulations in the Compendium of Candidate GTR.

July 2011 notice of the US EPA and NHTSA joint final rule establishing new requirements for the fuel economy and environment label posted on the window sticker of all new automobiles sold in the U.S., corresponding with the US request to list this rule in the Compendium of Candidate GTR.

Note: the symbol box in paragraph 9 of this document should contain the letters “UI” (unique identifier).

Correction to the standard administrative footnote on the document title page.

Correction to Revision 2 of UN R51, concerning an error in the reference to the Consolidated Resolution on the Construction of Vehicles (R.E.3).

WP.29 secretariat proposal for corrections to Revision 5 of UN Regulation 49.

WP.29 secretariat proposal to correct several errors in references to footnotes in Annex 1 of the regulation.

Update of the comprehensive Forum document containing the list of all UN Regulations, application by Contracting Parties, designated Type Approval Authorities, and designated Technical Services under the 1958 Agreement.