Listing documents from 2017
Documents also available for 2020 2019 2018 2016 More than 4 years ago
Show all 481 documents (This may take some time)
Date Reference Description Status
17 Jan 2017 GRE/2017/2
Proposal for Supplement 7 to the original version of Regulation No. 128
Working Party Working Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to<ol class="alpha"><li>introduce provisions for LED substitute light sources into Regulation No. 128;</li><li>introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);</li><li> establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);<li></li>introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).</li></ol>
17 Jan 2017 GRE/2017/3
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
Working Party Working Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Proposal to introduce new light emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. The proposal is part of a package which also includes amendments to Regulation No. 128.
17 Jan 2017 GRE/2017/5
Proposal for Supplement 7 to the original version of Regulation No. 128
Working Party Working Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to introduce requirements and test specifications to light emitting diode (LED) forward lighting light sources.
17 Jan 2017 GRE/2017/6
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
Working Party Working Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1. The proposal is part of a package which includes amendments to Regulation No. 128.
20 Jan 2017 GRE-77-02
Equivalence criteria for LED substitute light source categories as equivalents for corresponding filament light source categories
Working Party Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers
20 Jan 2017 GRE-77-03
Substitute light sources: equivalence reports for C5W, PY21W, and R5W
Working Party Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers
20 Jan 2017 GRE-77-04
GTB guidelines for introduction and evaluation of LED light source categories intended for forward lighting applications
Working Party Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources
31 Oct 2016 SLR-14-02
Lighting regulations and the DETA Unique Identifier
Informal Group Informal 1958 Agreement 1958 Agreement Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined. GTB understanding of the application of the Unique Identifier (UI) and the UN secure Internet database in accordance with Schedule 5 of the 1958 Agreement.
16 Nov 2016 SLR-14-03
Info for GTB on DETA and Unique Identifier
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined. Email from the DETA secretary providing an update on the status of the DETA project and its eventual application to lighting products under the Simplification of Lighting Regulations.
03 Dec 2016 SLR-14-04
Simplification of the UN lighting and Regulations Stage 2 (Performance-based, Technology neutral)
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Presentation addressing the "opportunity of a lifetime", including<ul><li>Chinese plans for simplification of GB Standards,</li><li>Synchronisation of the UN and Chinese Regulations and Standards,</li><li>Longer-term vision for global harmonisation, and</li><li>Removal of barriers to innovation and the administrative burden.</li></ul>
05 Dec 2016 SLR-14-05
Issues on UN Regulations on light sources in Annex 4 of UN Regulation No. 0 (IWVTA)
Informal Group Informal International Whole Vehicle Type Approval System (IWVTA) International Whole Vehicle Type Approval UN Regulation No. 0 on uniform provisions concerning the International Whole Vehicle Type Approval Simplification of Lighting Regulations SLR To be determined. Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Gas-discharge Light Sources Gas-discharge Light Sources Uniform Provisions Concerning the Approval of Gas-discharge Light Sources for use in Approved Gas-discharge Lamp Units of Power-driven Vehicles Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers The regulation of lighting includes individual regulations for specific lighting devices (headlamps, direction indicators, etc.), for light source (filament, gas, LED), and for installation (UN R48). The proposed UN R0 on the type approval of whole vehicles requires submission of approval certificates for components and systems to be included within the whole vehicle approval. Vehicle manufacturers work directly with UN R48 approvals, but lamp and device approvals are generally handled by lighting suppliers. UN R48 includes provisions for listing approvals of lighting units, but not for approvals of light sources (presently UN R37, R99, and R128). In order to avoid excessive administrative burdens, GTB proposes that the regulations covering light units include provisions to confirm their approval under the applicable light source regulations such that UN R48 approvals would represent approval of the vehicle lighting systems under both device regulations and light-source regulations.
25 Jan 2017 SLR-15-01
Application of the DETA Unique Identifier to Lighting Regulations: Update of GRE-76-24/Rev1
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined.
31 Jan 2017 VGL-05-04
Extract from the GTB study on visibility and glare (GRE-71-32)
Informal Group Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
31 Jan 2017 VGL-05-05
Headlamp glare zone under CIE 188:2010
Informal Group Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Extract from the International Commission on Illumination publication "Performance Assessment Method for Vehicle Headlighting Systems".
11 Feb 2017 VGL-05-06/Rev.1
Presentation of results from investigations of headlamp glare at the DEKRA Klettwitz proving grounds
Informal Group Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
18 Mar 2017 SLR-16-03
Cross-references and explanations for the draft Light-Signalling Devices (LSD) Regulation
Informal Group Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Simplification of Lighting Regulations SLR To be determined.
18 Mar 2017 SLR-16-04
Light-Signalling Devices Regulation: Status of source regulations
Informal Group Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Simplification of Lighting Regulations SLR To be determined. Table of regulations and pending proposals that would in whole or in part be consolidated into the new UN Regulation on light-signalling devices.
17 Mar 2017 GRE-77-07
Request for guidance concerning proposals for road llumination devices, lighti-signalling devices, and COP for adaptive front lighting
Working Party Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles
30 Mar 2017 GRE-77-11
Proposal to amend GRE/2016/28 (Supplement 8 to the 01 series of amendments to UN R123)
Working Party Informal Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Proposal to clarify that the decision table refers to the worst case situation and to correct a cross-reference.
30 Mar 2017 GRE-77-12
Revision of GRE/2017/5 (Proposal for Supplement 7 to the original version of Regulation No. 128)
Working Party Informal Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Updated proposal to introduce requirements and test specifications to light emitting diode (LED) forward lighting light sources.
30 Mar 2017 GRE-77-13
Revised proposal for amendments to the Consolidated Resolution on the common specification of light source categories (Revision of GRE/2017/6)
Working Party Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Revised proposal to introduce a new light emitting diode (LED) forward lighting light source category L1. The proposal is part of a package which includes amendments to Regulation No. 128.
30 Mar 2017 GRE-77-14
Incorporation of LED light sources in the new Regulation for Road Illumination Devices (RID)
Working Party Informal Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Headlamps Equipped with Gas-discharge Light Sources Gas-discharge-light Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Equipped with Gas-discharge Light Sources Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Symmetrical Beam Headlamps of Filament, Gas-discharge, or LED Type Symmetrical Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament, Gas-discharge light sources or LED Modules Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Discussion paper concerning modifications to the draft proposal for a new UN Regulation on road illumination devices in order to achieve the aims of GRE/2016/34 which proposed amendments to Regulations 19, 98, 112, 113 and 123.
30 Mar 2017 GRE-77-15
Proposal to introduce requirements for the use of LED substitute light sources in the new Regulation for “Light-signalling devices”
Working Party Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:<ol><li>Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).</li><li>COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.</li><li>Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.</li><li>The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.<br/><br/>This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.</li><li>In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.</li><li>The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.</li></ol>
30 Mar 2017 GRE-77-16
Updating the requirements of Regulation No. 48 on signalization of light source failure in lamps equipped with multiple light sources
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices During October 2016, GRE-76 adopted collective amendments (GRE/2016/31) to align the requirements of lamp regulations (7, 23, 38, 48, 77, 91 and 119) to guarantee the conformity of the lamp in case of any failure or the mandatory indication that a failure had occurred. This means that when a failure indication signal is provided by the lamp, the vehicle shall be equipped with a tell-tale indicating the failure. Thus, amendments were proposed for Regulation No. 48 to specify the modes of displaying the corresponding failure (see GRE/2016/7). Subsequently, some GRE experts requested GTB to clarify the text of its proposal. This proposal amends UN R48 with respect to all lamps affected by GRE/2016/31 to include the failure indication requirement. The proposal does not apply to the failure indication requirements already in UN R 48 prior to the last (76th) GRE session.
03 Apr 2017 GRE-77-22
Introduction into Regulation 128 of LED Substitute Light Sources
Working Party Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers
16 May 2017 SLR-17-06
Ideas for stages 2 and 3 in the simplification of UN lighting regulatons
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Presentation of opportunities, including potential to develop harmonized global technical regulation(s), in the simplification of lighting regulations.
31 Aug 2017 SLR-19-04/Rev.1
Draft proposal to amend definition of Type for AFS in RID
Informal Group Informal Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Adaptive Front-lighting Systems Adaptive Front-lighting Systems Uniform Provisions Concerning the Approval of Adaptive Front-lighting Systems (AFS) for Motor Vehicles Proposal to amend the definition of "type" for adaptive front lighting systems under the draft regulation on Road Illumination Devices.
10 Aug 2017 GRE/2017/14
Proposal to introduce requirements for the use of light-emitting diode substitute light sources in the new Regulation on Light-Signalling Devices
Working Party Working Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Proposal to introduce the following changes into the draft new Regulation on light-signalling devices:<ol><li>Use of LED substitute light source(s) is allowed and does not constitute a change of the lamp type. However, lamp performances shall be tested during type approval also with the LED substitute light source. Approval of the lamp using filament light source(s) is a prerequisite for approval of the lamp using LED substitute light source(s).</li><li>COP testing of the lamp is required with an (etalon) filament light source only, because the LED substitute is the counterpart light source of the filament light source, resulting in equivalent photometrical lamp performance. The quality i.e. the equivalence to the filament light source, is controlled in R128.</li><li>Use of LED substitute light sources is at the discretion of the applicant, who shall declare this use, if any, to the Approval Authorities at the time of application for the first lamp approval or subsequent extension of approval issued for the version using the LED substitute light source.</li><li>The use of LED substitute light source(s) in a certain lamp type shall be indicated on the lamp by marking of the LED substitute light source category, in addition to the marking of the filament light source of which the LED substitute light source is the counterpart.</li><li>This marking on the lamp will be used for checking the allowance for use of lamps with LED substitute light sources in application of the Regulation on lamps installation on vehicle.</li><li>In case a lamp with colour filter(s) is approved for using LED substitute light source(s), this lamp shall be marked “G” to indicate that this lamp shall be equipped with LED substitute light source(s) marked “G” for colour and luminous intensity quality reasons.</li><li>The indication of both the filament light source and of its LED counterpart light source, if any, shall be explicitly provided in the communication form.</li></ol>
10 Aug 2017 GRE/2017/15
Proposal to introduce requirements for the use of replaceable light emitting diode light sources for forward lighting in the new Regulation on Road Illumination Devices
Working Party Working Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Proposal to introduce requirements for replaceable light-emitting diode (LED) light sources for forward lighting in the new Regulation on Road Illumination Devices (RID). As the Informal Working Group "Simplification of the Lighting and Light-Signalling Regulations" (IWG SLR) continues working on the new RID Regulation, it is not possible to indicate all detailed modifications that will be required to incorporate the replaceable LED light sources for forward lighting. However, in general, only simple editorial changes will be required. Further work is required to identify the changes that will be required in the annexes.
10 Aug 2017 GRE/2017/16
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
Working Party Working Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to introduce a new light emitting diode (LED) forward lighting light source category L1/6. The proposal is part of a package which also includes amendments to Regulation No. 128. 2. GTB proposes one category L1/6 with “maximum test temperature” 65 °C. The definition of the maximum test temperature is necessary to ensure interchangeability between approved light sources from different manufacturers. A separate (unique) light source category is specified for every "maximum test temperature". The choice of installation of a light source with a given maximum test temperature is based on the application in the vehicle and determined by due diligence of the car maker and set maker, in the same way as is now the case with LED modules.
10 Aug 2017 GRE/2017/17
Proposal for amendments to the original version of the Consolidated Resolution on the common specification of light source categories
Working Party Working Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to introduce new light-emitting diode (LED) substitute light source categories C5W/LED, PY21W/LED and R5W/LED. This proposal is part of a package which also includes amendments to Regulation No. 128.
07 Aug 2017 GRE/2017/19
Proposal for Supplement 46 to the 03 series of amendments to Regulation No. 37
Working Party Working Filament Lamps Filament Lamps Uniform Provisions Concerning the Approval of Filament Lamps for Use in Approved Lamp Units of Power-driven Vehicles and of their Trailers Proposal to correct a reference to standard IEC (pursuant to a change in paragraph numbering of the IEC standard) and to align UN R37 with UN R48 and UN R128 with regard to the use of the term "chromaticity area". The wording "required tolerance area" in case of colour is changed to "required chromaticity area" to align with Regulation No. 48. This proposal was initiated by a proposal to amend Regulation No. 128 aimed at avoiding confusion with other tolerance areas.
07 Aug 2017 GRE/2017/18
Proposal for amendment 1 to the original version of the Consolidated Resolution on the common specification of light source categories
Working Party Working Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources With the publication of Revision 8 of Regulation No. 37 and the subsequent adoption of the Consolidated Resolution on the common specification of light source categories (R.E.5) (ECE/TRANS/WP.29/2016/111), light source experts and users of light source Regulations have made the correct linkages between the Resolution and third party documents. This proposal corrects a number of minor editorial errors in sheets of filament light sources that were discovered while making such linkages. The proposal further includes a number of customary administrative updates of International Electrotechnical Commission (IEC) cap sheet numbers in the IEC cap sheet references.
07 Aug 2017 GRE/2017/20
Proposal for Supplement 7 to the original version of Regulation No. 128
Working Party Working Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to introduce requirements and test specifications for light emitting diode (LED) light sources for forward lighting.
07 Aug 2017 GRE/2017/21
Proposal for Supplement 7 to the original version of Regulation No. 128
Working Party Working Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers Proposal to introduce requirements and test specifications for light emitting diodes (LED) substitute light sources, including to<ol class="alpha"><li>introduce provisions for LED substitute light sources into Regulation No. 128;</li><li>introduce new category sheets C5W/LED, PY21W/LED and R5W/LED based on LED technology into the Consolidated Resolution (R.E.5);</li><li> establish equivalence criteria as guidance for specifying sheets for LED substitute light source categories. (These guidelines are intended for publication, with the agreement of GRE, on the GRE website under “reference documents”, similar to criteria for new filament light sources for head lighting (GRE-77-04). In addition, these criteria are being prepared for insertion in publication IEC 60810.);<li></li>introduce equivalence reports for the new categories C5W/LED, PY21W/LED and R5W/LED in LED technology (see GRE-77-02).</li></ol>
04 Aug 2017 GRE/2017/24
Proposal for Supplement 11 to the 06 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to enable approval of side-marker and position lamps with regard to switching requirements when mutually incorporated. Vehicles include designs where lamps wrap around vehicle corners. In cases where optional side-marker lamps are grouped with a position lamp that is reciprocally incorporated with the direction indicator, it should be possible to switch off the side-marker lamp (as can be done with the position lamp) in order to improve conspicuity of the direction indicator.
09 Aug 2017 GRE/2017/22
Proposal for a collective amendment to Regulations Nos. 48, 53, 74 and 86
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Moped Lighting Moped Lighting Uniform Provisions Concerning the Approval of Category L1 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Lighting and Lighting-Signalling Equipment on Tractors Tractor Lighting Uniform Provisions Concerning the Approval of Agricultural or Forestry Tractors with regard to the Installation of Lighting and Light-signalling Devices Proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86.
31 Aug 2017 SLR-19-06/Rev.1
Revised draft justifications for the proposed regulations on lighting devices (LSD, RID, RRD)
Informal Group Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers Retro-reflective Devices and Markings (RRD) Retro-reflective Devices (RRD) Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles
25 Sep 2017 SLR-20-14
New definitions under UN Regulation No. 48 (04, 05, and 06 series)
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Draft proposal for definitions of "assembly", "function", and "headlamp" for application across the new UN lighting device regulations.
25 Sep 2017 SLR-20-07
Proposal for the Stage 2 plan for the Simplification of Lighting Regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined.
25 Sep 2017 SLR-20-08
Examples of markings for Road Illumination Devices (RID)
Informal Group Informal Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles
25 Sep 2017 SLR-20-09
Draft text of the proposal for updating UN R53 with references to the new lighting device regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices
25 Sep 2017 SLR-20-10
Draft text of the proposal for updating UN R74 with references to the new lighting device regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Moped Lighting Moped Lighting Uniform Provisions Concerning the Approval of Category L1 Vehicles with regard to the Installation of Lighting and Light-signalling Devices
25 Sep 2017 SLR-20-11
Draft text of the proposal for updating UN R86 with references to the new lighting device regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Installation of Lighting and Lighting-Signalling Equipment on Tractors Tractor Lighting Uniform Provisions Concerning the Approval of Agricultural or Forestry Tractors with regard to the Installation of Lighting and Light-signalling Devices
25 Sep 2017 SLR-20-13
Draft text of the proposal for updating UN R48.05 with references to the new lighting device regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
25 Sep 2017 SLR-20-12
Draft text of the proposal for updating UN R48.04 with references to the new lighting device regulations
Informal Group Informal Simplification of Lighting Regulations SLR To be determined. Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
02 Oct 2017 GRE-78-02
Subsitute LED light sources: Differences between proposals in GRE/2017/4 and GRE/2017/22
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Moped Lighting Moped Lighting Uniform Provisions Concerning the Approval of Category L1 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Lighting and Lighting-Signalling Equipment on Tractors Tractor Lighting Uniform Provisions Concerning the Approval of Agricultural or Forestry Tractors with regard to the Installation of Lighting and Light-signalling Devices Explanation of changes between the proposal to introduce requirements for light emitting diode (LED) substitute light sources into Regulations Nos. 48, 53, 74 and 86 presented at GRE-77E/2017/4) and the revised proposal (GRE/2017/22) submitted for consideration at GRE-78.
02 Oct 2017 GRE-78-04
Correction to the proposal for RID LED substitute light source requirements (GRE/2017/14)
Working Party Informal Road Illumination Devices (RID) Road Illumination Devices (RID) UN Regulation on uniform provisions concerning the approval of road illumination devices (lamps) and systems for power-driven vehicles Request to delete the amendment to paragraph 3.3.4.1.1. in the proposal to introduce requirements for the use of light-emitting diode substitute light sources in the new Regulation on Light-Signalling Devices. The proposed amendment was included in the submission by mistake.
02 Oct 2017 GRE-78-05
Correction of errors and discrepancies in the 05 and 06 series of amendments to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to address inconsistencies, clarify text, and correct terminology in Regulation No. 48:<ul><li>para. 5.7.2.1. editorial alignment of text with current terminology</li><li>replace undefined "effective outlet" terminology with defined "apparent surface" reference</li><li>reintroduction of missing reference to "transverse plane" in paras. 5.10.1. and 5.10.2.</li><li>para. 6.2.9. and related subsequent paragraphs to clarify the application of the 2000 lumen criteria</li><li>para. 6.26.9.2. to correct a cross-reference with UN R23.</li></ul>
03 Oct 2017 SLR-20-15
GTB Photometry Working Group comments on the draft Light-Signalling Devices (LSD) regulation
Informal Group Informal Light-Signalling Devices (LSD) Light-Signalling Devices UN Regulation on uniform provisions concerning the approval of light-signalling devices (lamps) for power-driven vehicles and their trailers
27 Nov 2017 SLR-21-04
Notes from the DETA and SLR meeting on 18 October 2017
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined. Notes from the 18 October discussion on approval markings and the DETA Unique Identifier database number between the DETA informal group and the SLR informal group.
01 Dec 2017 TFSR-01-02
GRE comments regarding misuse of substitute/retrofit lamps
Informal Group Informal Resolution on the common specification of light source categories (RE 5) RE 5: Resolution on light sources Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Motorcycle Lighting Motorcycle Lighting Uniform Provisions Concerning the Approval of Category L3 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Moped Lighting Moped Lighting Uniform Provisions Concerning the Approval of Category L1 Vehicles with regard to the Installation of Lighting and Light-signalling Devices Installation of Lighting and Lighting-Signalling Equipment on Tractors Tractor Lighting Uniform Provisions Concerning the Approval of Agricultural or Forestry Tractors with regard to the Installation of Lighting and Light-signalling Devices Comments collected by GRB in response to the proposals to prevent misuse of replacement lamps (GRE/2017/17, GRE/2017/22, GRE-78-28) during the 78th GRE session.
05 Dec 2017 SLR-21-07
Presentation for WP.29 on the Unique Identifier and lighting regulations
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined.
21 Dec 2017 SLR-21-08/Rev.1
Conventional type approval markings and application of the Unique Identifier
Informal Group Informal Database for the Exchange of Type Approval Documentation DETA n.a. Simplification of Lighting Regulations SLR To be determined. Preparation of a detailed proposal concerning Conventional Type Approval Markings and the Application of the Unique Identifier (UI) for decision at the SLR 21st Session.
14 Dec 2017 TFSR-01-08
GTB input for discussion of LED substitute and retrofit light source regulation
Informal Group Informal Light-Emitting Diode Light Sources LED Light Sources Uniform provisions concerning the approval of light emitting diode (LED) light sources for use in approved lamp units on power-driven vehicles and their trailers