Proposal to amend Annex B4, para. 4.2.1.1.1. to specify vehicle H selection without interpolation based on highest cycle energy demand and wheel selection criteria, amend para. 4.2.1.1.2. to permit optional interpolation method using two test vehicles or one vehicle tested twice with specified configurations, amend para. 4.2.1.5. to specify operation of movable aerodynamic body parts during road load determination, amend para. 4.2.2.1. to establish tyre rolling resistance measurement according to UN R117 02 series amendments and introduce Table A4/2 with rolling resistance classes and coefficients for C1, C2 and C3 tyres, amend para. 4.3.1.4.3. to establish rejection criteria for road load measurements not exceeding one-third of total measurement pairs and data evaluation procedures, amend para. 6. heading to include optional procedures for road load determination and calculation, amend para. 6.8. to permit optional measurement of friction differences on component or suitable dynamometer, add new paras. 6.9. to 6.10.1.1. to establish component dynamometer test procedures and optional calculation method for road load based on base vehicle measurement and technical vehicle parameters, and amend Annex B7 paras. 3.2.3.2.2.2.2. and 3.2.3.2.2.4. to reference Table A4/2 rolling resistance classes and permit optional calculation using actual tyre rolling resistance values.