Proposal to update the references to the three-dimensional H-point (3-D “H”-point) measurement and calibration procedure pursuant to updates and transfer of related provisions from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to Mutual Resolution No. 1 (M.R.1).
10. The expert from the Netherlands introduced ECE/TRANS/WP.29/GRSG/2024/19 and amendment GRSG-127-16. He explained that this amendment was needed, as was for UN GTR No. 6 (see paragraph 8above), to move the reference, drawings and specification of the 3-D H-point machine and calibration procedure from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to M.R.1. GRSG adopted ECE/TRANS/WP.29/GRSG/2024/19 as amended below. The secretariat was requested to submit the proposal as draft Supplement 12 to the 01 series of Amendments to UN Regulation No. 43, for consideration and vote to the November 2024 sessions of WP.29 and the Administrative Committee of the 1958 Agreement (AC.1).
Annex 22, footnote 1 (second time), correct as annex 24, footnote 1.
10. The expert from the Netherlands introduced ECE/TRANS/WP.29/GRSG/2024/19 and amendment GRSG-127-16. He explained that this amendment was needed, as was for UN GTR No. 6 (see paragraph 8above), to move the reference, drawings and specification of the 3-D H-point machine and calibration procedure from the Consolidated Resolution on the Construction of Vehicles (R.E.3) to M.R.1. GRSG adopted ECE/TRANS/WP.29/GRSG/2024/19 as amended below. The secretariat was requested to submit the proposal as draft Supplement 12 to the 01 series of Amendments to UN Regulation No. 43, for consideration and vote to the November 2024 sessions of WP.29 and the Administrative Committee of the 1958 Agreement (AC.1).
Annex 22, footnote 1 (second time), correct as annex 24, footnote 1.