GAR

Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43

Reference Number: GRSG/2017/15

Proposal to align UN R43 with GTR 6 and UN R125 with regard to the aiming positions of the driver’s eyes. This proposal corrects inconsistencies introduced during the transposition of GTR 6 into UN R43.

Submitted by: OICA

Document date: 14 Jul 17

Document status: Superseded

Relevant to

UN Regulation No. 43 | Safety Glazing Materials

View full document file for more information

Proposal for Supplement 6 to the 01 series of amendments to UN Regulation No. 43
Reference Number: WP.29/2017/111
Proposal to align the headform test with the deceleration measurement and the test of resistance to abrasion with ISO 15082:2016-11, including changes to the test details, correction of the headform calibration values, and the introduction of abrasion reference materials. The latter is combined with an abrasive-wheel qualification and a correction calculation (for plastic materials only). The proposal also amends Figure 2a of Annex 21 to better reflect the meaning of paragraph 2.4.2.2. of Annex 21, mainly to clarify the lateral limits of any opaque obscuration in this area.
Document date: 18 Aug 17
Document status: Adopted text published
Relevant to UN Regulation No. 43 \| Safety Glazing Materials
Adoption Vote
This proposal (WP.29/2017/111) was adopted by the World Forum. Thirty-five Contracting Parties out of the 47 applying UN R43 were present for the vote by AC.1. Thirty-five voted in favor with zero against and zero abstaining.
View full document file for more information

GRSG/2017/15	Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43
GRSG-113-16	Proposal for draft amendments to UN Regulation No. 43
GRSG-113-30	Comment on GRSG/2017/15: Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 43
WP.29/2017/111	Proposal for Supplement 6 to the 01 series of amendments to UN Regulation No. 43