ECE/TRANS/WP.29/GRSG/104, para. 30, based on GRSG-125-02-Rev.2, as reproduced in annex V to the GRSG session report.
Documentation
WP.29/2023/98/Rev.1
UN R160: Proposal for a 02 series of amendments
UN R160: Proposal for a 02 series of amendments
Proposal from GRSG to introduce a new component-level verification procedure for acceleration sensor accuracy with a two-year transitional period to allow for implementation.
This proposal (WP.29/2023/98/Rev.1) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 58 applying UN R160 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
Proposal to revise and clarify the acceleration data accuracy for the lateral and longitudinal acceleration data elements and introduce procedures to verify compliance of the acceleration data with the acceleration sensor accuracy specifications. The proposal is based on the following considerations:
There are multiple ways in which the acceleration data accuracy tolerance can be applied. This can potentially lead to different interpretations when applied by type-approval authorities. For clarity, the accuracy tolerance is specified as “+/- 10 per cent of the full range of the accelerometer used in the ECU containing the EDR function”.
The proposal enables a component test (including a time-shifting algorithm to address differences in sampling rates between an EDR and bench test) to address difficulties in verifying acceleration sensor accuracy under vehicle crash tests.
The proposal adds a footnote to clarify that the manufacturer has discretion (option) over the format for lateral acceleration data in rollover event because such data is not recorded using the lateral airbag deployment sensors.
The proposal adds Annex 6 on the verification procedure with an illustration of the tolerance corridor for lateral and longitudinal acceleration.
This proposal (WP.29/2023/101) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 58 applying UN R160 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
WP.29/2023/102
UN R160: Proposal for Supplement 2 to the 01 series of amendments
UN R160: Proposal for Supplement 2 to the 01 series of amendments
Proposal to revise and clarify the acceleration data accuracy for the lateral and longitudinal acceleration data elements and introduce procedures to verify compliance of the acceleration data with the acceleration sensor accuracy specifications. The proposal is based on the following considerations:
There are multiple ways in which the acceleration data accuracy tolerance can be applied. This can potentially lead to different interpretations when applied by type-approval authorities. For clarity, the accuracy tolerance is specified as “+/- 10 per cent of the full range of the accelerometer used in the ECU containing the EDR function”.
The proposal enables a component test (including a time-shifting algorithm to address differences in sampling rates between an EDR and bench test) to address difficulties in verifying acceleration sensor accuracy under vehicle crash tests.
The proposal adds a footnote to clarify that the manufacturer has discretion (option) over the format for lateral acceleration data in rollover event because such data is not recorded using the lateral airbag deployment sensors.
The proposal adds Annex 6 on the verification procedure with an illustration of the tolerance corridor for lateral and longitudinal acceleration.
This proposal (WP.29/2023/102) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 58 applying UN R160 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.