Contracting Party
Listing documents from More than four years ago
Documents also available for 2020 2019 2018 2017 More than 4 years ago
Show all 117 documents (This may take some time)
Date Reference Description Status
14 Jan 2010 GRE/2010/12
Proposal for Supplement 14 to Regulation No. 77
Working Party Working Parking Lamps Parking Lamps Uniform Provisions Concerning the Approval of Parking Lamps for Power-driven Vehicles
14 Jan 2010 GRE/2010/13
Proposal for supplements to Regulations Nos. 6 and 7
Working Party Working Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Proposal to delete Annex 5 of Regulation Nos. 6 and 7. The deletion of chromaticity requirements in the form of coordinates makes Annex 5 superfluous. The present proposal would delete Annex 5, inserting its content into paragraph 8 and renumbering the remaining annexes.
14 Jan 2010 GRE/2010/14
Proposal for Supplement 14 to Regulation No. 50
Working Party Working Position and Indicator Lamps for Motorcycles Motorcycle Lamps Uniform Provisions Concerning the Approval of Front Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration Plate Illuminating Devices for Vehicles of Category L
14 Jan 2010 GRE/2010/15
Proposal for Supplement 13 to Regulation No. 91
Working Party Working Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers
27 Jul 2010 GRSG-2010-30
Proposal to develop a new Regulation on Mass Limiting Devices
Working Party Mass Limiting Devices Mass Limiting Devices None.
28 Apr 2010 GRSG-98-05
Proposal to develop a new Regulation concerning Weight Limiting Devices
Working Party Mass Limiting Devices Mass Limiting Devices None.
17 Mar 2011 GRE-65-13
Proposal for Supplement 1 to the 05 series of amendments to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
25 Mar 2011 GRE-65-13/Rev.1
Proposal for Supplement 1 to the 05 series of amendments to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
29 Mar 2011 GRE-65-30
Analysis of the influence of aiming, on visibility distance and glare
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
16 Jul 2009 GRE/2009/42
Proposal for draft Supplement 16 to Regulation No. 23
Working Party Working Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers
18 Mar 2009 GRE-61-08
Proposal for draft Supplement 16 to Regulation No. 23
Working Party Informal Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers
06 Apr 2011 GRSG-100-09
Proposal for amendments to Regulation No. 107
Working Party Informal Construction of Coaches and Buses Coach and Bus Construction Uniform Provisions Concerning the Approval of Category M2 or M3 Vehicles with regard to their General Construction
27 May 2011 GRPE-62-03
Remarks by the experts from Poland to ”Proposal for draft 01 series of amendments to Regulation No. 120”
Working Party Informal Measurement of Net Power and Fuel Consumption of Tractors and Non-Road Mobile Machinery NRMM Net Power/Fuel Consumption Uniform Provisions Concerning the Approval of Internal Combustion Engines to be Installed in Agricultural and Forestry Tractors and in Non-Road Mobile Machinery, with regard to the Measurement of the Net Power, Net Torque, and Specific Fuel Consumption
27 Jul 2011 GRE/2011/32
Proposal for Supplement 1 to the 05 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
03 Oct 2011 GRE-66-17
Proposal for Supplement 1 to the 05 series of amendments – Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
13 Sep 2011 WLTP-DTP-07-13
Comments on hydrocarbon-emissions measurement under R83.06
Informal Subgroup Informal Worldwide Harmonized Light Vehicle Emissions Test Procedure WLTP Worldwide Harmonized Light Vehicles Test Procedure
13 Jan 2012 GRE/2012/21
Proposal for Supplement 2 to the 05 series of amendments to UN R48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal from Poland to introduce performance-based distance and glare criteria for headlamps, making automatic levelling provisions independent of the luminous flux of the light source.
29 Feb 2012 GFV-18-05
Comments on the document GRPE-63-06-Rev. 1
Informal Group Informal Liquefied Petroleum and Compressed Natural Gas Retrofit Systems LPG/CNG Retrofit Systems Uniform Provisions Concerning the Approval of: I Specific LPG (Liquefied Petroleum Gases) Retrofit Systems to be Installed in Motor Vehicles for the Use of LPG in their propulsion system II. Specific CNG (Compressed Natural Gas) Retrofit Systems to be Installed in Motor Vehicles for the Use of CNG in their propulsion system Comments from Poland on the Gaseous Fueled Vehicles (GFV) informal group proposal to redefine the class of bi-fuel vehicles under UN R115 in order to permit the simultaneous use of gas and petrol while in gas mode.
29 Feb 2012 GFV-18-04
Comments on the document GRPE-63-05-Rev. 1
Informal Group Informal Motor Vehicle Emissions Motor Vehicle Emissions Uniform Provisions Concerning the Approval of Vehicles with regard to the Emission of Pollutants According to Engine Fuel Requirements Comments from Poland on the Gaseous Fueled Vehicles (GFV) informal group proposal to redefine the class of bi-fuel vehicles under UN R83 in order to permit the simultaneous use of gas and petrol while in gas mode.
27 Mar 2012 GRE-67-33
GRE/2012/21: How and why?
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Presentation of the Polish Motor Transport Institute in support of the proposal to replace fixed values for headlamp aiming and tolerances with performance-based specifications.
28 Mar 2012 GRE-67-37
Proposal for Supplement 2 to the 05 series of amendments to Regulation 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Revised version of Poland's proposal (GRE/2012/21) to introduce performance-based distance and glare criteria for headlamps, replacing the fixed 2000 lm luminous flux condition as a criterion of the automatic leveling requirement.
03 Aug 2012 GRE/2012/27
Proposal for Supplement 3 to the 05 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Submission from Poland to replace the artificial 2,000 lm borderline and LED automatic levelling requirements with performance-based distance and glare criteria for headlamps.
16 Oct 2012 GRE-68-29
Proposal for amendment to Regulation No. 7
Working Party Informal Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers UN R7 has no requirements concerning changes in luminance of a lamp. Therefore, certain lamps which could not be installed in accordance with UN R48 could nonetheless obtain type approval and be sold in the aftermarket. This proposal would prevent such an occurrence.
16 Oct 2012 GRE-68-31
Poland: comments on OICA comments on document GRE/2012/27
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Poland's response to comments submitted by OICA (document GRE-68-20) regarding document GRE/2012/27 concerning the influence of headlamp initial aiming and leveling tolerances on road illumination distance.
25 Jan 2013 GRE/2013/15
Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Submitted by Poland to replace document GRE/2012/27 proposing an alternative set of requirements for the initial aiming of dipped-beam headlamps and allowing to remove the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic levelling.
25 Jan 2013 GRE/2013/38
Proposal for supplement 23 to the 02 series of amendments to Regulation No. 7
Working Party Working Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers UN R7 has no requirements concerning changes in lamp luminance. Therefore, certain lamps which could not be installed in accordance with UN R48 could nonetheless obtain type approval and be sold in the aftermarket. This proposal would prevent such an occurrence. This document supersedes GRE-68-29.
25 Jan 2013 GRE/2013/16
Proposal for collective amendments - Regulations Nos. 6, 7, 19, 23, 38, 87 and 91
Working Party Working Direction Indicators Direction Indicators Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers Position, Stop and End-outline Lamps Position, stop and end-outline lamps Uniform Provisions Concerncing the Approval of Front and Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for Motor Vehicles (Except Motor Cycles)and their Trailers Front Fog Lamps Front Fog Lamps Uniform Provisions Concerning the Approval of Power-driven Vehicle Front Fog Lamps Reversing Lights Reversing Lights Uniform Provisions Concerning the Approval of Reversing and Manoeuvring Lamps for Power-driven Vehicles and their Trailers Rear Fog Lamps Rear Fog Lamps Uniform Provisions Concerning the Approval of Rear Fog Lamps for Power-driven Vehicles and their Trailers Daytime Running Lamps Daytime Running Lamps Uniform Provisions Concerning the Approval of Daytime Running Lamps for Power-driven Vehicles Side-Marker Lamps Side-Marker Lamps Uniform Provisions Concerning the Approval of Side-Marker Lamps for Motor Vehicles and their Trailers Text prepared by Poland and Austria to clarify the possibility of installing on vehicles light-signalling devices which obtained a type approval according to component UN Regulations.
07 Aug 2013 GRE/2013/57
Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling. This document supersedes document GRE/2013/15.
25 Oct 2013 GRE-70-41/Rev.1
Presentation on the proposal for alternative headlamp aiming/leveling under Regulation No. 48: Revised
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Revised presentation in support of document GRE/2013/57 proposing to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic leveling.
17 Jan 2014 GRE/2014/11
Proposal for Supplement 3 to the 06 series of amendments to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Text prepared by Poland to introduce an alternative set of performance-based requirements for the initial aiming of dipped-beam headlamps and allowing removing the artificial 2,000 lm borderline and Light Emitting Diode (LED) automatic levelling.
20 Oct 2014 GRE-72-21
Draft proposal to introduce “side illuminating lamp” to Regulation No. 119 and Regulation No. 48
Working Party Informal Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to introduce type-approval provisions for lamps intended to provide supplemental lateral illumination of the road on the driver-side of the vehicle as a means to reduce the impact of glare from on-coming vehicle headlamps on driver vision and road visibility.
20 Oct 2014 GRE-72-21/Add.1
Presentation on "side-illuminating lamps"
Working Party Informal Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
27 Oct 2014 GRE-72-23/Rev.1
Poland comments on GTB suggestions for implementing the GTB Visibility and Glare Study in Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
23 Jan 2015 GRE/2015/6
Proposal for a Supplement to Regulation No. 48
Working Party Working Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to introduce provisions for "side-illuminating lamps" that aim to improve the driver's visibility over the opposite side of the road (on-coming traffic side) and its buffer zone to mitigate the impact of glare from on-coming vehicles.
23 Jan 2015 GRE/2015/19
Proposal for Supplement 5 to the 01 series of amendments to Regulation No. 119
Working Party Working Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Proposal to introduce provisions for “side-illuminating lamps” that aim to improve the driver’s visibility over the opposite side of the road (on-coming traffic side) and its buffer zone to mitigate the impact of glare from on-coming vehicles.
08 Apr 2015 GRE-73-12
Revised proposal for a Supplement to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Proposal to introduce provisions for “side-illuminating lamps” that aim to improve the driver’s visibility over the opposite side of the road (on-coming traffic side) and its buffer zone to mitigate the impact of glare from on-coming vehicles. This submission supersedes the earlier formal document GRE/2015/6.
08 Apr 2015 GRE-73-13
Revised proposal for Supplement 5 to the 01 series of amendments to Regulation No. 119
Working Party Informal Cornering Lamps Cornering Lamps Uniform Provisions Concerning the Approval of Cornering Lamps for Power-driven Vehicles Proposal to introduce provisions for “side-illuminating lamps” that aim to improve the driver’s visibility over the opposite side of the road (on-coming traffic side) and its buffer zone to mitigate the impact of glare from on-coming vehicles. This submission supersedes the earlier document GRE/2015/19.
08 Apr 2015 GRE-73-18
Comments on the proposal for the 07 series of amendments to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices Comments on the proposal to introduce new requirements for automatic leveling systems as a means to reduce driver glare (document GRE/2015/5).
13 Apr 2015 GRE-73-21
Proposal for a Supplement to the 01 series of amendments to Regulation No. 112
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Proposal to allow LED light source approval based on photometric criteria in place of the current minimum criteria of 1000 lumens.
17 Apr 2015 GRE-73-27
Side illuminating lamp
Working Party Informal
17 Apr 2015 GRE-73-28
Comments on GTB & OICA proposal for the 07 series of amendments to Regulation No. 48
Working Party Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
24 Sep 2015 VGL-01-02/2
Poland comments on the draft VGL informal group terms of reference
Informal Group Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
14 Oct 2015 R55-11-14
UN Regulation No. 55 revision: Proposal for worst-case physical testing
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles
26 Jun 2015 R55-10-20
UN Regulation No. 55 revision: Proposal for worst-case physical testing
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles
26 Jun 2015 R55-10-19
UN Regulation No. 55 revision: Proposal for worst-case physical testing
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles
01 Jun 2014 R55-07-19
UN Regulation No. 55 revision: Proposal for worst-case physical testing
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles
08 Oct 2015 GRE-74-11
Proposal for a Supplement to the 01 series of amendments to Regulation No. 112
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Proposal to introduce a new optional “Class B1” headlamp. The proposal would establish photometric requirements for Class B1 based on average real performance of present Class B (halogen/LED) but would not include additional design restrictions such as the luminous flux of light source.
22 Oct 2015 GRE-74-23
Presentation in support of the proposal for Class B1 headlamps under UN R112
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Presentation concerning the proposal (document GRE-74-11) to introduce a new optional “Class B1” headlamp. The proposal would establish photometric requirements for Class B1 based on average real performance of present Class B (halogen/LED) but would not include additional design restrictions such as the luminous flux of light source.
26 Jan 2016 R55-12-21
UN R55: Worst-case physical testing draft amendment
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles Proposed text for determining worst case conditions for physical testing of couplings.
11 Feb 2016 GRSG/2016/4
Proposal for amendment to Regulation No. 55
Working Party Working Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles At the May 2015 Type Approval Authorities Meeting (TAAM), Poland raised concerns (attached with this submission) over small M<sub>1</sub> vehicles being equipped with aftermarket coupling devices where the vehicle in question is not designed for towing a trailer. In effect, these vehicles are not permitted to tow trailers, but are nonetheless enabled to be equipped for such a purpose by the aftermarket devices. Therefore, Poland proposes to amend UN R55 to ensure that coupling devices are only approved for use on vehicles approved for towing trailers.
22 Jan 2016 GRE/2016/18
Proposal for Supplement 7 to the 01 series of amendments to Regulation No. 112
Working Party Working Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Proposal to introduce a new optional “Class B1” headlamp. The proposal would establish photometric requirements for Class B1 based on average real performance of present Class B (halogen/LED) but would not include additional design restrictions such as the luminous flux of light source.
29 Apr 2016 R55-13-23
Proposal GRSG/2016/4 to amend Regulation No. 55
Informal Group Informal Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles Copy of the proposal by Poland to amend UN R55 to ensure that coupling devices are only approved for use on vehicles approved for towing trailers.
05 Jul 2016 GRRF/2016/32
Proposal for an amendment to Regulation No. 55
Working Party Working Mechanical Coupling Components Mechanical Couplings Uniform Provisions Concerning the Approval of Mechanical Coupling Components of Combinations of Vehicles Proposal to restrict component type-approval for mechanical coupling devices dedicated to category M1 vehicles to use only on such M1 vehicles as are designed to tow trailers.
26 Jul 2016 VGL-03-10
N - vehicles load/headlamp levelling measurements proposal
Informal Group Informal Installation of Lighting and Lighting-Signalling Equipment Installation of Lighting Uniform Provisions Concerning the Approval of Vehicles with regard to the Installation of Lighting and Light-signalling Devices
21 Sep 2016 GRSG-111-05
Proposal for amendments to UN Regulation No. 43
Working Party Informal Safety Glazing Materials Safety Glazing Uniform Provisions Concerning the Approval of Safety Glazing Materials and their Installation on Vehicles Proposal concerning document GRSG/2015/22 to clarify the specification of the abrasion test machine.
07 Oct 2016 GRSG-111-17
Proposal for amendments to Regulation No. 67
Working Party Informal Liquefied Petroleum Gas Equipment LPG Equipment Uniform Provisions Concerning the Approval of: I. Specific Equipment of Motor Vehicles Using Liquefied Petroleum Gases in their Propulsion System II. A Vehicle Fitted with Specific Equipment for the Use of Liquefied Petroleum Gases in its Propulsion System with regard to the Installation of such Equipment Proposal to clarify the definitions of LPG container accessories to facilitate coordination between the separate, independent approvals required for the LPG container and for its accessories. The proposal does not introduce any changes in technical requirements or changes in the test methodology. The proposed changes are intended to prevent the possibility of improper selection of accessories for the tank, which could arise due to lack of clear provisions of type-approval certificates issued for accessories fitted to the container.
28 Oct 2016 GRE-76-26
Explanations to ECE/TRANS/WP.29/GRE/2016/18
Working Party Informal Headlamps Emitting an Asymmetrical Passing Beam Asymmetrical Beam Headlamps Uniform Provisions Concerning the Approval of Motor Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped with Filament Lamps and/or Light-Emitting Diode (LED) Modules Presentation concerning the proposal to introduce a new optional “Class B1” headlamp.