| Other documents |
WP.29/2016/52 | Proposal for Supplement 21 to the 00 series of amendments to Regulation No. 54
|
Proposal for Supplement 21 to the 00 series of amendments to Regulation No. 54
|
|
Reference Number: WP.29/2016/52
|
|
Proposal to: - correct the code 19 rim diameter, amend the tyre dimension requirements,
- modify the marking requirements to replace PSI with kilopascals (“kPa”),
- change the measurement units for drum speed from min-1 to km.h-1 and align the wording in Annex 7, Appendix 1 with the text of the Regulation,
- add new tyre sizes to Annex 5, allow for special tyres that can also be used as snow tyres to be marked with the inscription M+S, M.S, or M&S while remaining in the category of use “special”,
- align definitions and content with the other tyre regulations (UN Regulations Nos. 30, 117, 75 etc.),
- include a definition of “manufacturer” extracted from the resolution “R.E.3”
- adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links, and
- add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.
[These documents erroneously refer to the 01 series of amendments. This should be corrected as the 00 series of amendments to UN R54.]
|
|
Meeting Sessions: 169th WP.29 session (21-24
Jun 2016)
|
|
Document date: 05 Apr 16
|
|
Document status: Adopted text published
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2016/52) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 46 applying UN R54 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
WP.29/2016/52 | Proposal for Supplement 21 to the 00 series of amendments to Regulation No. 54
|
Proposal for Supplement 21 to the 00 series of amendments to Regulation No. 54
|
|
Reference Number: WP.29/2016/52
|
|
Proposal to: - correct the code 19 rim diameter, amend the tyre dimension requirements,
- modify the marking requirements to replace PSI with kilopascals (“kPa”),
- change the measurement units for drum speed from min-1 to km.h-1 and align the wording in Annex 7, Appendix 1 with the text of the Regulation,
- add new tyre sizes to Annex 5, allow for special tyres that can also be used as snow tyres to be marked with the inscription M+S, M.S, or M&S while remaining in the category of use “special”,
- align definitions and content with the other tyre regulations (UN Regulations Nos. 30, 117, 75 etc.),
- include a definition of “manufacturer” extracted from the resolution “R.E.3”
- adopt a common definition and use of the terms “Manufacturer’s name”, “Brand name”, “Trademark”, “Trade description” and “Commercial name” and their links, and
- add information in the certificate to enable approval authorities to more easily understand the products the certificate addresses.
[These documents erroneously refer to the 01 series of amendments. This should be corrected as the 00 series of amendments to UN R54.]
|
|
Meeting Sessions: 169th WP.29 session (21-24
Jun 2016)
|
|
Document date: 05 Apr 16
|
|
Document status: Adopted text published
|
|
Relevant to
|
|
Adoption Vote
|
|
This proposal (WP.29/2016/52) was adopted by the World Forum. Thirty-seven Contracting Parties out of the 46 applying UN R54 were present for the vote by AC.1. Thirty-seven voted in favor with zero against and zero abstaining.
|
|
View full document file for more information
|
|