UN Regulation No. 120
Measurement of Net Power and Fuel Consumption of Tractors and Non-Road Mobile Machinery

Uniform Provisions Concerning the Approval of Internal Combustion Engines to be Installed in Agricultural and Forestry Tractors and in Non-Road Mobile Machinery, with regard to the Measurement of the Net Power, Net Torque, and Specific Fuel Consumption

Download the Regulation

Revisions and Amendments

Series of Amendments and Supplements

Application of the Regulation

Contracting Parties applying UN R120

Related News and Information


Access all 0 headlines (This may take a minute.)

Development of the Regulation

No changes to this regulation are pending.

Latest Documents

13 Apr 2018

UN R120: Proposal for the 02 series of amendments | WP.29/2018/52

7 Mar 2018

UN R120: Draft 02 series of amendments | GRPE/76/Add.3

9 Jan 2018

UN R120: Proposal for a new series of amendments | GRPE-76-14

See all 12 related documents

Latest Meeting Discussions
Working Party on Pollution and Energy \| Session 80 \| 14-17 Jan 2020
Working Party on Pollution and Energy \| Session 78 \| 7-11 Jan 2019
World Forum for the Harmonization of Vehicle Regulations \| Session 175 \| 18-22 Jun 2018
	See more related meetings

Latest Meeting Discussions
Working Party on Pollution and Energy \| Session 80 \| 14-17 Jan 2020
Working Party on Pollution and Energy \| Session 78 \| 7-11 Jan 2019
World Forum for the Harmonization of Vehicle Regulations \| Session 175 \| 18-22 Jun 2018
	See more related meetings

Regulation:	UN Regulation No. 117 \| Tire Rolling Sound Emissions, Adhesion on Wet Surfaces, and Rolling Resistance
Document:	Revision 4 \| Amendment 2
Corresponds to:	02 series of amendments \| Supplement 10 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/54 Proposal to correct a type in Annex 7- Appendix 2, Part 2, Paragraph 5 where the snow group index should read “1.00”, not “100” as appeared erroneously in the adopted text correct the text where the word “tyres” was inadvertently omitted from Paragraph 2.1. align the provisions of UN R117 regarding approval numbers and markings with the provisions of Schedule 4 to the revised 1958 Agreement.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 4 \| Amendment 2
Corresponds to:	03 series of amendments \| Supplement 2 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/40 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number update i-Size universal ISOFIX, Specific Vehicle ISOFIX, i-Size Booster seat and Specific Vehicle Booster seat numbering (omitted in WP29-2018-045) rearrange the dimensions mark for arrangements of the approval mark where used in combination with the module mark change the 145 cm stature of the Specific Vehicle Booster seat to 150 cm stature as this is the correct upper limit, and clarify that Conformity of Production assessments shall be conducted under the same requirements as those of the original approval or, if applicable, the extension of the approval.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 3 \| Amendment 4
Corresponds to:	02 series of amendments \| Supplement 5 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/39 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy specify the dimensions of the approval number correct the term “Regulation No. 129-02” to “UN Regulation No. 129/02” change the 145 cm stature of the Specific Vehicle Booster seat to the 150 cm stature as this is the upper limit, and modify the approval markings for consistency between technical services and approval authorities and between the labels of products approved under the 02 and 03 series.

Regulation:	UN Regulation No. 129 \| Enhanced Child Restraint Systems
Document:	Revision 1 \| Amendment 7
Corresponds to:	01 series of amendments \| Supplement 6 (Entered into force on 11 Jan 2020)
Based on:	Document WP.29/2019/38 Proposal to introduce new and modified labeling and to clarify packaging information to distinguish between forward-facing-only, rear-facing-only, and convertible CRS in order to reduce the risk of users misusing these enhanced CRS, and clarify that assessment of the DE plane only applies to rearward-facing Child Restraint Systems (CRS) in UN Regulation No. 44 and therefore does not apply to forward-facing child restraints that maintain structure of the child restraint behind the head of the dummy.

UN Regulation No. 120 Measurement of Net Power and Fuel Consumption of Tractors and Non-Road Mobile Machinery