Session 170 | Geneva | 15-18 Nov 2016
4.7.3. Proposal for Supplement 5 to the 04 series of amendments to Regulation No. 107
WP.29/2016/91 | Proposal for Supplement 5 to the 04 series of amendments to Regulation No. 107 Proposal to clarify paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement.
4.7.4. Proposal for Supplement 6 to the 05 series of amendments to Regulation No. 107
WP.29/2016/92 | Proposal for Supplement 6 to the 05 series of amendments to Regulation No. 107 Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 05 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement.
4.7.5. Proposal for Supplement 6 to the 06 series of amendments to Regulation No. 107
WP.29/2016/93 | Proposal for Supplement 6 to the 06 series of amendments to Regulation No. 107 Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 06 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement.
4.7.6. Proposal for Supplement 1 to the 07 series of amendments to Regulation No. 107
WP.29/2016/94 | Proposal for Supplement 1 to the 07 series of amendments to Regulation No. 107 Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 07 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement.
WP.29/2016/91
Proposal for Supplement 5 to the 04 series of amendments to Regulation No. 107
09 Sep 2016 World Forum Formal Documents Construction of Coaches and Buses Coach and Bus Construction Uniform Provisions Concerning the Approval of Category M2 or M3 Vehicles with regard to their General Construction Proposal to clarify paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement. WP.29/2016/0091
WP.29/2016/92
Proposal for Supplement 6 to the 05 series of amendments to Regulation No. 107
09 Sep 2016 World Forum Formal Documents Construction of Coaches and Buses Coach and Bus Construction Uniform Provisions Concerning the Approval of Category M2 or M3 Vehicles with regard to their General Construction Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 05 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement. WP.29/2016/0092
WP.29/2016/93
Proposal for Supplement 6 to the 06 series of amendments to Regulation No. 107
09 Sep 2016 World Forum Formal Documents Construction of Coaches and Buses Coach and Bus Construction Uniform Provisions Concerning the Approval of Category M2 or M3 Vehicles with regard to their General Construction Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 06 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement. WP.29/2016/0093
WP.29/2016/94
Proposal for Supplement 1 to the 07 series of amendments to Regulation No. 107
09 Sep 2016 World Forum Formal Documents Construction of Coaches and Buses Coach and Bus Construction Uniform Provisions Concerning the Approval of Category M2 or M3 Vehicles with regard to their General Construction Proposal to extend requirements introduced via Supplement 4 to the 04 series of amendments concerning barriers in the gangway and the amount of priority seats to the 07 series of amendments. The proposal also aims to paragraph 7.7.5.1. with regard to ceiling-mounted displays or monitors and simplify the testing procedure:<ul><li>The gauge shall be used only for the identification of the monitors to be tested.</li><li>The simplified way to apply the removal force corresponds to a passenger pushing the monitor/display with its hand, and in these conditions the acceptable force limit is adapted.</li><li>The test must be conducted in both directions.</li><li>The proposed wording for the last condition to fulfil is more technology neutral, the case of automatic redeployment is also considered and banned.</li></ul> The proposal would also redefine the measurement criteria for determining appropriate seat spacing, including the use of a new testing gauge for the H dimension measurement. WP.29/2016/0094