|
00 series of amendments
| Corrigendum 1
(1999)
|
0
|
|
1
|
|
|
00 series of amendments
| Supplement 1
(2002)
|
0
|
1
|
|
|
|
00 series of amendments
| Supplement 1
| Corrigendum 1
(2003)
|
0
|
1
|
1
|
|
|
00 series of amendments
| Supplement 6
(2010)
|
0
|
6
|
|
|
|
00 series of amendments
| Supplement 5
(2009)
|
0
|
5
|
|
|
|
00 series of amendments
| Supplement 4
(2007)
|
0
|
4
|
|
|
|
00 series of amendments
| Supplement 3
(2005)
|
0
|
3
|
|
|
|
00 series of amendments
| Supplement 2
(2004)
|
0
|
2
|
|
|
|
00 series of amendments
| Corrigendum 2
(2013)
|
0
|
|
2
|
|
|
00 series of amendments
| Supplement 7
(2016)
|
Proposal to transpose requirements for new snow tyres (under UN R117) into UN R109 in order of avoid the exclusion of retreaded tyres from such applications/markets.
|
WP.29/2015/67
|
|
Discussion from 166th WP.29 session
|
|
69. Agenda item 4.9.2, Regulation No. 109, ECE/TRANS/WP.29/2015/67,
Paragraph 6.4.4.2. subparagraph (c), correct to read:
“(c) a copy of the last report of the Conformity of Production as required in UN Regulation No. 117. "
|
|
0
|
7
|
|
|
|
00 series of amendments
| Supplement 8
(2017)
|
Proposal to amend Annex 7 and Annex 10. This proposal would: - change measurement units for drum speed in Annex 7 from min-1 to km.h-1 to align the requirements with other tyre regulations;
- correct the wording from “speed category symbol” to “speed symbol” (as defined in para. 2.33);
- correct the wording from “load capacity index” to “load index” (as defined in para. 2.32);
- correct a reference to para. 3.2.13. of the Regulation in Annex 7, Appendix 1;
- correct a boundary value of load index in Annex 7, Appendix 1;
- delete in paragraph 2.1 in Annex 7, the possibility to use the 2.0 m drum diameter to perform the endurance test.
In Annex 10, the proposal aligns the text with Annex 7 of UN R117, 02 series of amendments, Supplement 5.
The proposal would also clarify provisions for the minimum heights for markings for tyres with nominal rim diameter codes ≥ 20 and nominal section width ≤ 235 and for tyres with nominal rim diameter codes < 20 and nominal section width > 235. The proposal also corrects tables and figures for the use of lowercase letter to denote tyre dimension specifications.
|
WP.29/2017/9
|
|
|
|
This proposal (WP.29/2017/9) was adopted by the World Forum. Thirty-four Contracting Parties out of the 48 applying UN R109 were present for the vote by AC.1. Thirty-four voted in favor with zero against and zero abstaining.
|
|
0
|
8
|
|
|
|
00 series of amendments
| Supplement 9
(2018)
|
Addendum from GRRF to include provisions for PSI or kilopascal (kPa) markings and to clarify inflation pressure under the test procedures in the proposal for Supplement 9.
|
WP.29/2018/59/Add.1
|
|
Discussion from 175th WP.29 session
|
|
83. The World Forum considered the draft amendments under agenda items 4.8.1 to 4.8.9 and recommended their submission to AC.1 for voting, subject to the following corrections:
In ECE/TRANS/WP.29/2018/53, page 2: for “Supplement 15” read “Supplement 16”,
In ECE/TRANS/WP.29/2018/59/Add.1, correct to read:
Insert the missing amendment to former paragraph 3.2.10, to read: | "3.2.11. | An indication, by means of the “PSI” index (as explained in Annex 7, Appendix 2 to this Regulation) or in kilopascals (kPa), of the inflation pressure to be adopted for the load/speed endurance tests. This indication may be placed on one sidewall only." |
Annex 7, paragraph 1.3., amend to read: | “1.3. | Inflate the tyre to the pressure corresponding to the indication on the sidewall as specified in paragraph 3.2.11. of this Regulation.” |
84. WP.29 referred informal documents WP.29-175-04 and WP.29-175-05 to the appropriate GR for further consideration.
|
|
|
|
This proposal (WP.29/2018/59/Add.1, as amended by para. 83, was adopted by the World Forum. Thirty-three Contracting Parties out of the 49 applying UN R109 were present for the vote by AC.1. Thirty-three voted in favor with zero against and zero abstaining.
|
|
In order to have a Regulation on the retreaded tyres with definitions and provisions structured in the same way of those previously introduced in amendments of “new tyres” Regulations, this amendment: - Indicates that for the purpose of this Regulation “tyres” means “pneumatic tyres”, so all the text has been reviewed
- Introduces a definition of :
- “retreader” copy based on that “manufacturer” in the tyres regulations
- Brand name", “Trademark”, “Trade description” and “Commercial name” as defined in the tyre regulations
- Material manufacturer / material supplier
- Takes into account the rounding rules (already approved in the other tyre regulations) for the calculation of width and diameter of the tyres
- Aligns the title and the provisions of the para. 12 related to the names and addresses of Technical Services, Approved Laboratories and administrative Department with their equivalent in the tyres regulations
|
WP.29/2018/59
|
|
|
|
This proposal (WP.29/2018/59) was adopted by the World Forum. Thirty-three Contracting Parties out of the 49 applying UN R109 were present for the vote by AC.1. Thirty-three voted in favor with zero against and zero abstaining.
|
|
0
|
9
|
|
|
|
00 series of amendments
| Supplement 10
(Adopted by WP.29)
|
Proposal to align the provisions for retreaded tyres marked using the three-peak-mountain snow-flake (3PMSF) symbol with amendments to UN R117 and to restore the remainder of a sentence that was unintentionally deleted in paragraph 3.2.1. during a previous amendment procedure.
|
WP.29/2020/74
|
|
|
|
This proposal (WP.29/2020/74) was adopted by the World Forum. Thirty-nine Contracting Parties out of the 51 applying UN R109 were present for the vote by AC.1. Thirty-nine voted in favor with zero against and zero abstaining.
|
|
0
|
10
|
|
|
|
00 series of amendments
| Supplement 11
(Adopted by WP.29)
|
Proposal to align the provisions for retreaded tyres with parallel proposals for UN R54 and UN R117 and to cover all the tread materials and to allow upgrading of the service description of a used casing subject to meeting conditions for traceability.
|
WP.29/2022/7/Rev.1
|
|
0
|
11
|
|
|
|
00 series of amendments
| Supplement 12
(Adopted by WP.29)
|
|
WP.29/2023/75
|
|
|
|
This proposal (WP.29/2023/75) was adopted by the World Forum. Thirty-one Contracting Parties out of the 53 applying UN R109 were present for the vote by AC.1. Thirty-one voted in favor with zero against and zero abstaining.
|
|
0
|
12
|
|
|
|
01 series of amendments
(Formal GR review)
|
Proposal from the ad hoc working group on retreaded tyres to move provisions for snow grip performance of retreaded tyres and their classification as traction tyres from R109 into a new UN Regulation on type approval of retreaded tyres of classes C1, C2 and C3 with respect to their snow grip performance and/or classification as traction tyre.
|
GRBP/2024/3
|
|
Proposal to replace document ECE/TRANS/WP.29/GRBP/2024/03
|
GRBP-79-26
|
|
Consolidated version including the amendments proposed with document ECE/TRANS/WP.29/GRBP/2024/03 amended by GRBP-79-26..
|
GRBP-79-27
|
|
1
|
|
|
|